Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Advanced search

Results 1 - 10 of 56
Order by: Results/page:
12 3 4 5 6 > 
ID: RFSR-CT-2007-00019
Start date: 2007-07-01, End date: 2016-06-30
Zn-Al-Mg coatings have a significant potential for improving corrosion resistance. Especially in Asia unpainted Zn-Al-Mg hot dip galvanised coatings are established products for construction industry. Their high coating thickness allows for sufficient long times for the format...
Programme: ECSC-COAL-STEEL-RTD C
Record Number: 87225
Last updated on: 2008-05-22
ID: RFSR-CT-2007-00026
Start date: 2007-10-01, End date: 2016-09-30
The main aim is to develop and apply deep cryogenic treatments (DCT) in order to improve wear resistance and fatigue life of: - automotive components, that may lead to weigth reduction; - metalforming tooling and machining tools, that may lead to increase the tools life. ...
Programme: ECSC-COAL-STEEL-RTD C
Record Number: 87231
Last updated on: 2008-05-22
ID: RFSR-CT-2007-00012
Start date: 2007-07-01, End date: 2017-12-31
The objective of this research is to improve steel cleanness, including improvement to the size and distribution of non-metallics in the as-cast semi to improve downstream processing and final properties, using conventional single M-EMS and modern multimode M-EMS and technolog...
Programme: ECSC-COAL-STEEL-RTD C
Record Number: 87219
Last updated on: 2008-05-22
ID: RFSR-CT-2007-00003
Start date: 2007-07-01, End date: 2017-12-31
New alternate carbon sources for sintering (Acasos) will be investigated with the aim to substitute coke breeze. Therefore Acasos, i.e. biomass, deposited carbon rich dust, BF-dust and alternate sources as petroleum coke and anthracite will be identified, characterised and eco...
Programme: ECSC-COAL-STEEL-RTD C
Record Number: 87210
Last updated on: 2008-05-22
ID: RFSR-CT-2007-00018
Start date: 2007-07-01, End date: 2016-06-30
The set up of clear and rigorous methodologies of hydrogen measurement is mandatory to continue the development of coated steel products with high strength and sensitive microstructures to hydrogen embrittlement. How to measure 0.1 mass ppm of hydrogen which diffuses very rapi...
Programme: ECSC-COAL-STEEL-RTD C
Record Number: 87224
Last updated on: 2008-05-22
ID: RFCR-CT-2007-00008
Start date: 2007-07-01, End date: 2016-06-30
DENOPT addresses the topic "Efficient protection of the environment and improvement of coal as clean energy source" focusing on the improvement of SCR DeNOx performance related to deactivation and mercury oxidation. The goal of the project is to develop novel catalyst material...
Programme: ECSC-COAL-STEEL-RTD C
Record Number: 87194
Last updated on: 2008-05-22
ID: RFSR-CT-2007-00022
Start date: 2007-07-01, End date: 2016-06-30
There are no satisfying empirical models and only physically based models for special steels available. The aim of the project is to find in literature those formulations of physically based approaches that are most promising. By extensive use of computational thermodynamics a...
Programme: ECSC-COAL-STEEL-RTD C
Record Number: 87228
Last updated on: 2008-05-22
ID: RFS2-CT-2007-00030
Start date: 2007-07-01, End date: 2052-06-30
The technical objective is to disseminate Structural Fire Safety Engineering Knowledge gained in recent ECSC&RFCS funded projects to practicing engineers in various countries, in their own languages. This project will extend a previous RFCS project entitled DIFISEK that covere...
Programme: ECSC-COAL-STEEL-RTD C
Record Number: 87199
Last updated on: 2008-05-22
ID: RFSR-CT-2007-00004
Start date: 2007-07-01, End date: 2016-06-30
The objective of the project is using appropriate sensors to qualify the stirring state, to develop innovative signal processing, to obtain representative indices and use them as input in an on-line desulphurisation model, adjust the process and contribute to improvement of de...
Programme: ECSC-COAL-STEEL-RTD C
Record Number: 87211
Last updated on: 2008-05-22
ID: RFSR-CT-2007-00010
Start date: 2007-07-01, End date: 2017-12-31
The proposed project focuses on development of innovative pyrometallurgical technologies for recycling especially of residuals from stainless steel making. One part deals with the briquetting of stainless steel residuals and direct recycling into the EAF. The other part dea...
Programme: ECSC-COAL-STEEL-RTD C
Record Number: 87217
Last updated on: 2008-05-22
12 3 4 5 6 > 
List retrieved on: 2017-10-22
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top