Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Advanced search

Results 71 - 80 of 286
Order by: Results/page:
|< < 3 4 5 6 7 89 10 11 12 > >| 
ID: RFSR-CT-2006-00018
Start date: 2006-07-01, End date: 2009-06-30
The goal of the project is to create a ground for an industrial technology utilising the promising concept of grain size control by means of dispersoidic inoculants placed into the steel microstructure. The project objectives are to create and improve the basic knowledge of gr...
Programme: ECSC-COAL-STEEL-RTD C
Record Number: 80419
Last updated on: 2006-11-24
ID: RFSR-CT-2006-00035
Start date: 2006-07-01, End date: 2009-06-30
The objective of this project is to develop and assemble a transportable demonstrator, which uses Laser Induced Breakdown Spectroscopy (LIBS), for automatic sorting of steel scrap. Two applications are planned for field testing of the device: -Sorting and classification of shr...
Programme: ECSC-COAL-STEEL-RTD C
Record Number: 80436
Last updated on: 2006-11-24
ID: RFSR-CT-2006-00028
Start date: 2006-07-01, End date: 2009-06-30
Based on the existing technical data on standard fire behaviour of steel and composite structure connections, the current proposed project is aimed to investigate in detail the behaviour of connections under natural fire condition by means of: - natural fire heating condition ...
Programme: ECSC-COAL-STEEL-RTD C
Record Number: 80429
Last updated on: 2006-11-24
ID: RFCR-CT-2006-00009
Start date: 2006-07-01, End date: 2009-06-30
A promising technology for improvement of use of coal as a clean energy source and CO2 capture is Oxy-Fuel Combustion. Important research activities in this field are in progress. However, works performed so far has mainly dealt with investigations on process feasibility, its...
Programme: ECSC-COAL-STEEL-RTD C
Record Number: 80400
Last updated on: 2006-11-24
ID: RFSR-CT-2006-00039
Start date: 2006-07-01, End date: 2009-12-31
The overall aim of this research project is to enhance the sinter efficiency by optimisation of the sinter mix homogeneity and permeability based on chemical inline-monitoring and on-strand permeability test devices. One of the two main objectives of the project is the develop...
Programme: ECSC-COAL-STEEL-RTD C
Record Number: 80440
Last updated on: 2006-11-24
ID: RFSR-CT-2006-00011
Start date: 2006-07-01, End date: 2009-12-31
This project will investigate the possibilities to use asymmetrical rolling in existing mills in order to decrease loads, increase reductions and improve strip geometry and material properties. The project involves tests in pilot and industrial mills, FE-modelling and metallur...
Programme: ECSC-COAL-STEEL-RTD C
Record Number: 80413
Last updated on: 2006-11-24
[PROJECT] LASERHARD - Laser treatment of profiled rolls
ID: RFSR-CT-2006-00012
Start date: 2006-07-01, End date: 2009-12-31
A laser heat source can melt a surface layer, up to 1mm in depth, typically less than the abrasive wear depth for a rolling campaign. Due to the rapid cooling a significant increase in the hardness is produced without affecting the substrate metallurgy. A protective layer can ...
Programme: ECSC-COAL-STEEL-RTD C
Record Number: 80414
Last updated on: 2006-11-24
ID: RFSR-CT-2006-00014
Start date: 2006-07-01, End date: 2009-06-30
The current trend of cold tandem mills of combining higher rolling speed, larger reduction, harder steel grades significantly increase problems of cooling and lubrication degradation. This project aims at improving cooling performances to make better lubricant properties in c...
Programme: ECSC-COAL-STEEL-RTD C
Record Number: 80415
Last updated on: 2006-11-24
ID: RFSR-CT-2006-00037
Start date: 2006-07-01, End date: 2009-12-31
To significantly improve the efficiency of their production chains, European steel producers need a global optimisation strategy that allows the incorporation of factory-wide systems to predict and control the evolution and influences in terms of quality through the different ...
Programme: ECSC-COAL-STEEL-RTD C
Record Number: 80438
Last updated on: 2006-11-24
ID: RFSR-CT-2006-00010
Start date: 2006-07-01, End date: 2009-12-31
Excessive iron fines generation during rolling is of nuisance, both in the mill and in subsequent production steps. The aim of the project is to control the iron fines and oil residues generated during a cold rolling process. To achieve that objective, research is focused on ...
Programme: ECSC-COAL-STEEL-RTD C
Record Number: 80412
Last updated on: 2006-11-24
|< < 3 4 5 6 7 89 10 11 12 > >| 
List retrieved on: 2017-07-28
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top