Skip to main content
CORDIS - Forschungsergebnisse der EU
CORDIS
Inhalt archiviert am 2024-06-16

IONIC POLYMER-METAL COMPOSITE AS SENSOR AND ACTUATOR: APPLICATION IN MOTION CONTROL

Ziel

The project proposal aims at fabricating an innovative material that is Ionic Polymer-Metal Composite (IPMC), in order to develop prototypes of an artificial muscle and of emotion sensor. To reach the aforesaid objectives, all Participants will conduct a series of theoretical researches and experimental analysis. Imps bend, if a voltage misapplied across their thickness and, vice versa, they generate a voltage signal if mechanically deformed, quasi-statically or dynamically. It is quite evident the possibility to overwork these properties to build both motion actuators and sensors. This kind of materials has a big potentiality in several application fields, such as robotics, biomedical, aerospace, safety and surveillance.
Nevertheless, at the moment those applications are limited by the poor knowledge of the mechanisms, which are involved in the actuation and sensing operative modes, the lack of models able to describe the material behaviour. Comparing this type of materials with other existing ones, such as Shape Memory Alloy (SMA) or Pies Electric Materials (PZT), Epics are lighter, cane activated by low voltage (few volts compared to hundreds of volts of PZT), as a good low frequency response (up to a minimum of hundreds of kHz) and can be produced without using toxic elements, such as Ni, Cod, Pub.

Schlüsselbegriffe

Aufforderung zur Vorschlagseinreichung

FP6-2002-NMP-1
Andere Projekte für diesen Aufruf anzeigen

Koordinator

CONSORZIO CATANIA RICERCHE
EU-Beitrag
Keine Daten
Adresse
Via Santa Maria Del Rosario 9
CATANIA
Italien

Auf der Karte ansehen

Gesamtkosten
Keine Daten

Beteiligte (5)