Skip to main content
European Commission logo
italiano italiano
CORDIS - Risultati della ricerca dell’UE
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary
Contenuto archiviato il 2024-06-18

FeCo based magnetic alloys with high strength and minimized iron losses, for new high speed aerospace generator

Obiettivo

The development of a new Iron-cobalt soft magnetic alloy is proposed with a smart combination of both high mechanical strength and moderated iron losses. The former allows higher speed of electric generator, increasing the mass power density. The later improves the thermal transfer of dissipated energies, the sustainability of the generator and help then to a further power density increase. In the complete continuation of Aperam RTD efforts these last years, this new material very recently patented has been demonstrated
on laboratory scale and - in some few cases of working features – on
industrial tools for small quantities.
But this new material is roughly defined as a new alloys family – Iron-cobalt fully processed (i.e. annealed) and workable material – and it needs to be optimised and fully characterized with respect to working solicitations. In the framework of this project, such a high strength new FeCo alloy will be defined in terms of processing parameters corresponding to 800MPa yield stress (R0,2) whereas several metallurgical ways will be studied to get lower iron losses than previous know ones (280W/kg at 2T/400Hz for 0,4mm thickness) without a marked decrease of R0,2. Complementary processes
such as thin foils assembly, recovery or texturization will be used to reach this later target, with the help of a specialized partner (LPCES).
After optimization of the lamination structure and of its microstructure, the new material will be deeply characterized mechanically and magnetomechanically (including influence of uni- or bi-axial stresses on the magnetic properties) by an other specialized partner (LMT). At the same moment some small quantities (300 to 500kg) of the optimised alloy will be processed on industrial tools and punched in pieces to provide 2 rotor stacks to theTopic Manager Company.

Invito a presentare proposte

SP1-JTI-CS-2013-01
Vedi altri progetti per questo bando

Coordinatore

APERAM ALLOYS IMPHY SAS
Contributo UE
€ 68 970,00
Indirizzo
AVENUE JEAN JAURES
58160 IMPHY
Francia

Mostra sulla mappa

Tipo di attività
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Contatto amministrativo
Laurence Defosse (Mrs.)
Collegamenti
Costo totale
Nessun dato

Partecipanti (2)