Improvement of internal quality by controlling the microstructure of microalloyed cast steel

Informazioni relative al progetto

ID dell’accordo di sovvenzione: 7210-CA-904

Progetto chiuso

Data di avvio 1 Novembre 1995

Data di completamento 31 Ottobre 1998

Finanziato da

• Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995

Costo totale € 281 500,00

Contributo UE € 168 900,00

Coordinato da

IMATRA STEEL OY AB
Finland

Obiettivo

Internal cracking of rolled, medium carbon, low alloy bars is caused by the central- and V-segregation that is associated with the formation of martensitic regions in the blooms. It is necessary to know the individual effect of interdependent casting parameters on the solidification of the bloom using a numerical model. The objective of the project is to find a combination of casting parameters that minimizes the segregation and consequently increases the quality of the final product.

Programma(i)

• ECSC-STEELRES 8C - Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995

Argomento(i)

• C3 - Casting and solidification

Invito a presentare proposte

Data not available

Meccanismo di finanziamento

CSC - Cost-sharing contracts

Coordinatore

IMATRA STEEL OY AB

• Contributo UE: Nessun dato
• Indirizzo: Terästehtaantie 1 ; 55100 IMATRA ; Finlandia
• Costo totale: Nessun dato