Project description DEENESFRITPL A big boost for Zagreb’s additive manufacturing Additive manufacturing (AM) technologies have been met with enthusiasm in Europe. However, more specialists are needed. The EU-funded INEX-ADAM project will bridge networking gaps and deficiencies among UNIZAG FSB, one of the Faculties of the University of Zagreb, Croatia, and internationally leading EU institutions by reinforcing the excellence and innovative capacity for research in the field of AM within the Centre of Additive Technologies (CATeh). The project will promote intensive collaboration research with LTH, MUL, AIDIMME, and UBRUN, strengthen the synergy among research institutions, and raise the staff's research profile of the CATeh. INEX-ADAM will target three strategic research domains: Advanced Design for Additive Manufacturing, Medical Modelling for Additive Manufacturing and Material Modelling for Additive Manufacturing. Show the project objective Hide the project objective Objective Main goal of the INEX-ADAM project is to reduce networking gaps and deficiencies among UNIZAG FSB and internationally leading EU institutions, by significantly strengthening the excellence and innovative capacity for research in the field of Additive Manufacturing (AM) within the Centre of Additive Technologies (CATeh), as integral part of UNIZAG FSB. INEX-ADAM project will increasing S&T capacity and help raise staff's research profiles in advanced fields of AM through intensive collaboration research with institutions: LTH, MUL, AIDIMME and UBRUN. Project specific objectives will encompass strengthening the synergy among research institutions, strengthening scientific and innovation capacity and raise staff's research profile of the CATeh, within three strategic research domains: Advanced Design for Additive Manufacturing – products and tools, Medical Modelling for Additive Manufacturing and Material Modelling for Additive Manufacturing, and increasing CATeh and UNIZAG FSB, national and international impact and visibility. In INEX-ADAM project, CATeh (UNIZAG FSB) is the participant with needs in advanced knowledge from strategic AM research domains. In order to be able to keep up with world trends in AM field, CATeh researchers will during INEX-ADAM project, through cooperation with project partners, leading international institutions, acquire additional knowledge for advanced application of AM. INEX-ADAM will rely on intensive knowledge transfer and training of CATeh researchers with international leading institutions and their resources as well as on ADAM - joint platform of five EU institutions, project partners. Platform will serve as driver for new level of cooperation, knowledge, expertise and business opportunities through strong synergy effect and impact on all members and stakeholders, thus foster more advanced application of AM in the fields of engineering, design and medicine. Fields of science engineering and technologymaterials engineeringcompositesengineering and technologymechanical engineeringvehicle engineeringautomotive engineeringengineering and technologyenvironmental engineeringenergy and fuelsengineering and technologymechanical engineeringmanufacturing engineeringadditive manufacturingengineering and technologymaterials engineeringceramics Programme(s) H2020-EU.4.b. - Twinning of research institutions Main Programme Topic(s) WIDESPREAD-05-2017 - Twinning Call for proposal H2020-WIDESPREAD-2016-2017 See other projects for this call Sub call H2020-WIDESPREAD-05-2017-Twinning Funding Scheme CSA - Coordination and support action Coordinator SVEUCILISTE U ZAGREBU, FAKULTET STROJARSTVA I BRODOGRADNJE Net EU contribution € 342 837,50 Address IVANA LUCICA 5 10000 Zagreb Croatia See on map Region Hrvatska Grad Zagreb Grad Zagreb Activity type Higher or Secondary Education Establishments Links Contact the organisation Opens in new window Website Opens in new window Participation in EU R&I programmes Opens in new window HORIZON collaboration network Opens in new window Total cost € 342 837,50 Participants (4) Sort alphabetically Sort by Net EU contribution Expand all Collapse all LUNDS UNIVERSITET Sweden Net EU contribution € 214 675,00 Address Paradisgatan 5c 22100 Lund See on map Region Södra Sverige Sydsverige Skåne län Activity type Higher or Secondary Education Establishments Links Contact the organisation Opens in new window Website Opens in new window Participation in EU R&I programmes Opens in new window HORIZON collaboration network Opens in new window Total cost € 214 675,00 MONTANUNIVERSITAET LEOBEN Austria Net EU contribution € 142 712,50 Address FRANZ JOSEF STRASSE 18 8700 Leoben See on map Region Südösterreich Steiermark Östliche Obersteiermark Activity type Higher or Secondary Education Establishments Links Contact the organisation Opens in new window Website Opens in new window Participation in EU R&I programmes Opens in new window HORIZON collaboration network Opens in new window Total cost € 142 712,50 INSTITUTO TECNOLOGICO METALMECANICO, MUEBLE, MADERA, EMBALAJE Y AFINES-AIDIMME Spain Net EU contribution € 85 937,50 Address CALLE LEONARDO DA VINCI 38 PARQUE TECNOLOGICO 46980 Paterna Valencia See on map SME The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed. Yes Region Este Comunitat Valenciana Valencia/València Activity type Research Organisations Links Contact the organisation Opens in new window Participation in EU R&I programmes Opens in new window HORIZON collaboration network Opens in new window Total cost € 85 937,50 BRUNEL UNIVERSITY LONDON United Kingdom Net EU contribution € 211 263,75 Address KINGSTON LANE UB8 3PH Uxbridge See on map Region London Outer London — West and North West Harrow and Hillingdon Activity type Higher or Secondary Education Establishments Links Contact the organisation Opens in new window Website Opens in new window Participation in EU R&I programmes Opens in new window HORIZON collaboration network Opens in new window Total cost € 211 263,75
