Objectif
- Most of the deposit are defined and give coatings with required properties.
- Gas burners of GDF (non adhesive and wear resistance application - DECA 10 coating).
At present, GDF is in relation with two manufacturers to ensure industrial development. They have to work together in order to validate an industrial polishing technique in evaluating its industrial feasibility. Indeed, all the processes (surface preparation, thermal spraying) ensure now a good reproductibility of the coating quality except for the final step : polishing.
Moreover, the polished finish cannot be used on complex shape. Then another technique named microballing is currently studied.
- Pistons of CR-FIAT (thermal barrier application - HEXA 13 coating).
After several difficulties linked to a complex shape and the nature of the substrate, all processes were mastered : surface preparation and thermal spraying on top of pistons, machining operation in order to eliminate the coating surplus on the lateral sides.
An engine bench was performed on three pistons with complete success.
- Blades for aircraft engine (INTA, ONERA) (thermal berrier application - HEXA 13 coating)
A complete engine bench was performed including 15 blades with HEXA 13 coating.
The engine worked for 12 hours at maximum power without any problem.
The results (micrographies to analyse the structure of the coating) will be discussed in September 97 and attached to the final report.
- Naturally, the availability of the ICO25B3 and HEXA 13 powders is to be ranked as a successful result as well as that of the QC + Zr O(2) mixed cords which may be used in low cost thermal insulation. A complete data base on alloy compositions and thermal properties versus temperature is available.
New metallic materials, patented and produced on an industrial basis by partners of the consortium for the propose of one specific application, may be used as well for preparing Thermal Barrier Coatings and Low Friction Coatings. Their thermal conductivity is of the magnitude of that of zirconia and they offer friction coefficients with respect to steel in the range 0.08 - 0.15. Contrary to conventional ceramic, they are electronic conductors and may be welded.
The project is aimed at:
- improving the performances of present materials, especially at high temperature (1100 C),
- mastering the technology of coating preparation: Physical Vapour Deposition, Plasma Spraying, including welded plasma deposited coatings,
- challenge present applications and develop new ones in the fields of gas combustion chambers, aircraft engines and car engines.
The proposer consortium is composed of university laboratories, research centres, producers of mterials and equipments and consummer industries acting in three different domains (gas combustion, automotive and aeronautics which share the demand for high performance thermal insulation and low friction components. Energy savings and improved engine performances are expected together with the breakthrough of a new market in powder metallurgy and gas heated devices. Benefical impact on environment polution should follow.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- ingénierie et technologie génie mécanique génie automobile génie aérospatial avion
- ingénierie et technologie génie mécanique ingénierie de fabrication fabrication soustractive
- ingénierie et technologie ingénierie des materiaux revêtement et films
- ingénierie et technologie génie mécanique génie automobile génie aérospatial ingénierie aéronautique
- ingénierie et technologie génie mécanique tribologie
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Nous sommes désolés... Une erreur inattendue s’est produite.
Vous devez être authentifié. Votre session a peut-être expiré.
Merci pour votre retour d'information. Vous recevrez bientôt un courriel confirmant la soumission. Si vous avez choisi d'être informé de l'état de la déclaration, vous serez également contacté lorsque celui-ci évoluera.
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
84093 AVIGNON
France
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.