Skip to main content
European Commission logo
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS
Contenido archivado el 2024-04-30

New procedure for the manufacturing of thin- walled PTFE pipes

Objetivo



This proposal has already been submitted to the European Commission under the proposal number BEST-2988. After the rejection message, all remarks and recommendations of the experts are considered. At the present time, there is no cost-effective procedure to produce thin walled PTFE pipes. Therefore the RTD goal of this project is to develop a new procedure which promise - an optimisation of the manufacturing time (reduction of more than 40%), - more economical use of the material consumption and - a reduction of the minimal wall thickness of less than 1 mm. The range of applications for thin walled PTFE pipes reaches from heat exchangers for incineration plants up to desalination systems for ships etc. Simultaneously with a reduction of the production costs the results of the research promise a decrease of the mass and a raise of the efficiency of the descripted aggregates.

Convocatoria de propuestas

Data not available

Régimen de financiación

EAW - Exploratory awards

Coordinador

SCS srl
Aportación de la UE
Sin datos
Dirección
via Magnanelli 6/3
40033 Casalecchio di Reno BO
Italia

Ver en el mapa

Enlaces
Coste total
Sin datos