Skip to main content
European Commission logo print header

Active Pressure, Position and Temperature sensors for Turboshaft engines

Objective

ActiPPTSens consortium will established the technology benchmark on smart sensors for pressure, position and temperature measurement, based on the specification of NEWAC, DREAM and TEENI. Sensor technologies and their main features will be analysed and captured into a Sensors Technology Comparative Matrix, after the specification definition. The promising sensors technologies will be chosen for the prototype development. ActiPPTSens project have been structured as follow: Specification definition- The specification will be based on the public deliverable of project NEWAC, DREAM , VITAL and TEENI (new turboshaft concept) and TURBOMECA guideline as leader of the SAGE5 ITD; Benchmark of technologies- analysis of the existing technologies in the sensors field. Emerging or critical sensors technologies of several sector will be consider; and Prototype fabrication- Smart sensors prototypes of the selected technologies will be fabricated for their test in IDT SAGE 5 demonstrator. The initial technologies that the ActivePPTSens consortium considers as potential candidates for the prototype fabrication are: -Contactless Torque Sensor CTS, develop and patented by CEDRAT as technology was initiated for PSA. The CTS Contactless Torque Sensor measures the torque and the rotation speed of either a stationary axle or a rotating shaft without contact. -Piezoelectric MENS sensors, underdevelopment by INASMET-Tecnalia and ICV-CSIC. Piezoelectric sensors based on electrospun PZT nanofibers show higher pressure sensibility, longer life cycle, easy integration under structural elements and complex geometrical shape capability. -FBG devices, Fibre Bragg Grating technology with high embedding capability is under study for rotor blades or disks for the monitoring of aerial vehicles engine. The impact of the sensors technology to be develop in ActiPPTSens project would extend far beyond the consortium because of their impact in the cost saving and their transference to aerial vehicle

Call for proposal

SP1-JTI-CS-2009-01
See other projects for this call

Coordinator

FUNDACION TECNALIA RESEARCH & INNOVATION
EU contribution
€ 272 498,00
Address
PARQUE CIENTIFICO Y TECNOLOGICO DE GIPUZKOA, PASEO MIKELETEGI 2
20009 DONOSTIA-SAN SEBASTIAN (GIPUZKOA)
Spain

See on map

Region
Noreste País Vasco Gipuzkoa
Activity type
Research Organisations
Administrative Contact
Nieves Murillo (Dr.)
Links
Total cost
No data

Participants (3)