Skip to main content

Multi-scale computational fluid dynamics modelling and optimisation of the state-of-the-art solid oxide fuel cells

Objective

"The presently proposed research project will be an integral part of the ongoing solid oxide fuel cell research at the Department of Energy Conversion and Storage in Technical University of Denmark (DTU Energy Conversion). DTU Energy Conversion is a world leader in research, development and commercialisation of solid oxide fuel cells.
The third generation cell or metal-supported cell of DTU is currently at a more experimental stage. Here the anode support is replaced by a porous layer of ferritic stainless steel (approx. 78% iron and 22% chromium). The cell is constructed on top of a support consisting of iron and chromium. The anode is on the same metal powder as the support, but with a finer particle size. However due to the corrosion problems, other solutions are being sought, lanthanide doped strontium titanate (LST) being one of them. The advantages are a significant decrease in cost and an increased robustness in case of fuel supply failure or operating stop (redox and temperature cycles). At the same time the operating temperature is reduced to 550-650°C. In addition to the completely new support, all active components are being improved through characterisation, testing, and modelling.
DTU Energy Conversion would greatly benefit from an additional researcher working on the crucial aspects of the modelling of the above novel SOFC development project. DTU Energy Conversion have identified a researcher with the ideal background to perform the multi-scale thermo-fluid and electrochemical modelling of the state-of-the-art planar SOFC using numerical modelling approaches (i.e. a combination of FEM and CFD) in three-dimensions and in the process receive training and enhance his experience in the multidisciplinary set of skills, including SOFC development and manufacture, stack development, testing, and also administrative/technical management of the EU projects."

Field of science

  • /natural sciences/chemical sciences/inorganic chemistry/inorganic compounds
  • /engineering and technology/environmental engineering/energy and fuels/energy conversion
  • /engineering and technology/environmental engineering/energy and fuels/fuel cell
  • /natural sciences/physical sciences/classical mechanics/fluid mechanics/fluid dynamics

Call for proposal

FP7-PEOPLE-2012-IEF
See other projects for this call

Funding Scheme

MC-IEF - Intra-European Fellowships (IEF)

Coordinator

DANMARKS TEKNISKE UNIVERSITET
Address
Anker Engelundsvej 1 Bygning 101 A
2800 Kgs Lyngby
Denmark
Activity type
Higher or Secondary Education Establishments
EU contribution
€ 154 293,90
Administrative Contact
Peter Vang Hendriksen (Prof.)