Obiettivo To demonstrate a high efficiency 100-125 HP hammer mill for the manufacture of animal feed, based on similar smaller 5-50 HP mills developed by the same company.A 50 % saving in electrical consumption is expected compared to conventional mills with a horizontal straft, while a payback period of 1 year is foreseen.The raw material, fed by gravity, is milled by hammers located perpendicularly to the vertical straft, without being transported by these hammers. Twenty hammers are foreseen, each with 4 working positions. The hammers are surrounded by a cylindrical sieve allowing the exit of the ground particles at the right size.A saving of 50 %, i.e. 732000 kWh/yr for 330 days/yr and 24 h/day, is expected compared to conventional horizontal mills. Further advantages of the vertical mill are a low level of vibrations and no powder losses into the atmosphere. The design of the mill is innovatory. Programma(i) ENG-ENDEMO C - Programme (EEC) of demonstration projects and industrial pilot projects (EEC) in the energy field, 1985-1989 Argomento(i) 3.1 - AGRICULTURE Invito a presentare proposte Data not available Meccanismo di finanziamento DEM - Demonstration contracts Coordinatore MOLINOS SAYMA SA Contributo UE Nessun dato Indirizzo FERNANDO EL CATOLICO 48 50007 Zaragoza Spagna Mostra sulla mappa Costo totale Nessun dato
