Obiettivo The project demonstrates the continuous production of superheated steam by a complete combustion of nonmetallic car shredding waste, obtained in a suitable granulometry.The plant is dimensioned for a continuous nominal capacity of 20 Gcal/h. It uses a particular system for feeding and moving the combustible waste, constituted by a mechanical grate combined with a rotary kiln. Secondary air is injected through orientable nozzles, which allow the injection of air either perpendicular or tangential to the flue gas flow.The plant data can be summarized as follows: - steam output nominally 33 tonnes/h - steam pressure 44 kg/cm2 - superheat temperature 430 deg. C - feedwater temperature 146 deg. C - flue gas outlet temperature 200 deg. CThe flue gas is treated by means of a dry lime scrubbing system, consisting of a contact reactor, a cyclone for separating and recycling the reactants and an electrostatic precipitator. However, a wet scrubber will be built in case the results of dry scrubbing are unsatisfactory. Programma(i) ENG-ENDEMO C - Programme (EEC) of demonstration projects and industrial pilot projects (EEC) in the energy field, 1985-1989 Argomento(i) 1.3 - HEAT AND ENERGY FROM DIRECT COMBUSTION Invito a presentare proposte Data not available Meccanismo di finanziamento DEM - Demonstration contracts Coordinatore SANCINELLI SPA Contributo UE Nessun dato Indirizzo IT - 24040 LEVATE (BG) Italia Mostra sulla mappa Costo totale Nessun dato