Objectif Design, build and test a pipe cleaning device (pig) based on new dynamic concepts; this device will perform specially difficult internal pipe cleaning, its components being specifically designed according to requirements, and will incorporate a new and unique by-pass system, avoiding the traditionnal risk of choking.General concept of the tool has been defined with the design criteria of the cleaning and propulsion sub-assemblies.General Procedure of a cleaning operation based on the Turbo Pig concept has been drawn and tried.Tests in full scale operations with various parameters of the procedures to optimise the design of the components have been performed.Conclusion is that the Turbo Pig cleaning principle is successful although each cas will require an adequate configuration of the pigs components.PHASE 1This phase is a general design phase, including:- technical definition- environmental characterisation- system general architecture- specifications- laboratory simulation and tests- drawingsPHASE 2- construction of the prototypes- field testing Programme(s) ENG-HYDROCARB 2C - Programme (EEC) of support for technological development in the hydrocarbons sector, 1986-1989 Thème(s) 1.10 - TRANSPORT Appel à propositions Data not available Régime de financement DEM - Demonstration contracts Coordinateur CHALLENGER S.O.S. Contribution de l’UE Aucune donnée Adresse 49 BIS AVENUE FRANKLIN ROOSEVELT 75008 PARIS France Voir sur la carte Coût total Aucune donnée