Final Report Summary - VTAIL (Design and manufacturing of a business jet model for high and low speed tests)
Executive Summary:
The VTAIL model Design & Manufacturing had been performed by CMA-VALLET in close collaboration with DASSAULT AVIATION via a Call for Partner, won by CMA VALLET in 2014.
The entire fuselage with all its modularities were fully instrumented. The fuselage is compatible with the different wind tunnel tests setups and ready to be performed in the ONERA wind tunnels defore end of 2016.
The acceptance of the fuselage took place from September to December 2016 in the Vallet work shop in Rugles in the presence DASSAULT AVIATION and ONERA colleagues.
Project Context and Objectives:
The main goal of this project is to provide to DASSAULT AVIATION an airplane model ready to be tested at ONERA F1 & S1 wind tunnel.
Project Results:
Wind tunnel test results are owned by DASSAULT AVIATION and are confidentials.
Potential Impact:
N/A
List of Websites:
N/A
The VTAIL model Design & Manufacturing had been performed by CMA-VALLET in close collaboration with DASSAULT AVIATION via a Call for Partner, won by CMA VALLET in 2014.
The entire fuselage with all its modularities were fully instrumented. The fuselage is compatible with the different wind tunnel tests setups and ready to be performed in the ONERA wind tunnels defore end of 2016.
The acceptance of the fuselage took place from September to December 2016 in the Vallet work shop in Rugles in the presence DASSAULT AVIATION and ONERA colleagues.
Project Context and Objectives:
The main goal of this project is to provide to DASSAULT AVIATION an airplane model ready to be tested at ONERA F1 & S1 wind tunnel.
Project Results:
Wind tunnel test results are owned by DASSAULT AVIATION and are confidentials.
Potential Impact:
N/A
List of Websites:
N/A
