CORDIS
EU research results

CORDIS

English EN

Near-Wall Simulations and Measurements in Lean-Burn Engines

Objective

"In modern aero-engine combustors combustor tiles are used to protect the walls from the hot gases, the temperature of which is rising in new engines due to increasing pressure ratios. However, the amount of air used for wall cooling should be reduced to allow for maximal air flow rates through the fuel injector. This measure enables optimised lean combustion with lowest pollutant emission rates. This objective can be achieved by combining effusion cooling on the hot side with impingement cooling on the cold side of the tiles. This complex system needs to be simulated during design processes.

This project aims for improving the predictive capabilities and decreasing the uncertainties of current models regarding wall temperatures and thermal stresses. The model development will be supported and the emerging method will be validated by high-quality experimental data obtained from measurements on an engine-representative gas turbine combustor using Particle Image Velocimetry, Thermographic Phosphor Thermometry and Coherent anti-Stokes Raman Spectroscopy.

An iterative method is proposed which couples tabulated chemistry based CFD and finite element method (FEM) simulations. In the CFD calculations previously ignored flame-wall interactions will be considered by adjusting turbulence models and extending the tabulation method to non-adiabatic conditions. Results of highly resolved large eddy simulations will be used to improve the computationally efficient RANS based techniques. The CFD calculations will provide the convective heat transfer for the FEM simulations as a boundary condition. For an accurate prediction of the metal temperature – which is then fed back into the CFD part - and thermal stresses provided by the FEM, a probabilistic approach will be applied. A Monte Carlo method with a meta-model will be used to evaluate the thermal stochastic output improving the current state-of-the-art of thermal predictions."
Leaflet | Map data © OpenStreetMap contributors, Credit: EC-GISCO, © EuroGeographics for the administrative boundaries

Coordinator

TECHNISCHE UNIVERSITAT DARMSTADT

Address

Karolinenplatz 5
64289 Darmstadt

Germany

Activity type

Higher or Secondary Education Establishments

EU Contribution

€ 618 385

Administrative Contact

Melanie Meermann-Zimmermann (Dr.)

Participants (2)

Sort alphabetically

Sort by EU Contribution

Expand all

UNIVERSITY OF SURREY

United Kingdom

EU Contribution

€ 233 750

UNIVERSITAET DER BUNDESWEHR MUENCHEN

Germany

EU Contribution

€ 254 971

Project information

Grant agreement ID: 639510

Status

Closed project

  • Start date

    1 October 2014

  • End date

    31 March 2016

Funded under:

FP7-JTI

  • Overall budget:

    € 1 476 144,60

  • EU contribution

    € 1 107 106

Coordinated by:

TECHNISCHE UNIVERSITAT DARMSTADT

Germany