CORDIS
EU research results

CORDIS

English EN
Power cable modelling for WIPS electromechanical chain

Power cable modelling for WIPS electromechanical chain

Objective

The Multi Layer Cable Model MultiCaB project proposal aims to research and develop advanced parametric power cable models for aeronautical applications, specifically, thermo electric Wing Ice Protection Systems, WIPS.
Apart from basic voltage and current analysis, models must allow to simulate and study high frequency effects, such as skin and proximity effects, standing waves and resonances, conductive and isolation losses and temperature effects. Two different layers of the model, which are related to result accuracy and computational burden, are considered in the project.
To implement the model it is proposed a lumped parameters based model, which are frequency dependents, that must replicate the frequency response of the full cable for all the frequencies of interest. It means that not only the fundamental frequency have be taken into account in the model simulation, but also harmonics, switching frequency and high frequencies due to trise and tfall at the power converter must be considered for the complete results.
A specific research in cable models and high frequency effects, a powerful methodology based on experimental measurements and if proceed, FEM simulations, and experimental validation of developed models and methodologies will be performed in the project.
A proper management, a well-defined topic manager relationship and an adequate consideration of intellectual property rights and exploitation are included in the proposal.
The project is presented by researches and technicians from the MCIA Research Center of Universitat Politècnica de Catalunya (www.mcia.upc.edu), with probed experience in high frequency modeling of electric and electronics components and power electronics applications and control, as well as in European projects' management and execution.
Leaflet | Map data © OpenStreetMap contributors, Credit: EC-GISCO, © EuroGeographics for the administrative boundaries

Coordinator

UNIVERSITAT POLITECNICA DE CATALUNYA

Address

Calle Jordi Girona 31
08034 Barcelona

Spain

Activity type

Higher or Secondary Education Establishments

EU Contribution

€ 215 621,09

Administrative Contact

Carlos Laffitte Orti (Mr.)

Project information

Grant agreement ID: 632458

Status

Closed project

  • Start date

    1 August 2014

  • End date

    31 January 2016

Funded under:

FP7-JTI

  • Overall budget:

    € 287 594,78

  • EU contribution

    € 215 621,09

Coordinated by:

UNIVERSITAT POLITECNICA DE CATALUNYA

Spain