CORDIS
EU research results

CORDIS

English EN
Smart Assembly Robot with Advanced FUNctionalities

Smart Assembly Robot with Advanced FUNctionalities

Objective

While Industrial robots are very successful in many areas of industrial manufacturing, assembly automation still suffers from complex time consuming programming and the need of dedicated hardware. ABB has developed FRIDA (Friendly Robot for Industrial Dual Arm Assembly), a collaborative inherently safe assembly robot that is expected to reduce integration costs significantly by offering a standardized hardware setup and simple fitting of the robot into existing workplaces. Internal Pilot testing at ABB has however shown that when FRIDA is programmed with traditional methods the programming time even for simple assembly tasks will remain very long.
The SARAFun project has been formed to enable a non-expert user to integrate a new bi-manual assembly task on a FRIDA robot in less than a day. This will be accomplished by augmenting the FRIDA robot with cutting edge sensory and cognitive abilities as well as reasoning abilities required to plan and execute an assembly task.
The overall conceptual approach is that the robot should be capable of learning and executing assembly tasks in a human like manner. Studies will be made to understand how human assembly workers learn and perform assembly tasks. The human performance will be modelled and transferred to the FRIDA robot as assembly skills. The robot will learn assembly tasks, such as insertion or folding, by observing the task being performed by a human instructor. The robot will then analyze the task and generate an assembly program, including exception handling, and design 3D printable fingers tailored for gripping the parts at hand. Aided by the human instructor, the robot will finally learn to perform the actual assembly task, relying on sensory feedback from vision, force and tactile sensing as well as physical human robot interaction. During this phase the robot will gradually improve its understanding of the assembly at hand until it is capable of performing the assembly in a fast and robust manner.

Coordinator

ABB AB

Address

Kopparbergsvagen 2
72183 Vasteras

Sweden

Activity type

Other

EU Contribution

€ 1 054 747

Participants (5)

Sort alphabetically

Sort by EU Contribution

Expand all

ETHNIKO KENTRO EREVNAS KAI TECHNOLOGIKIS ANAPTYXIS

Greece

EU Contribution

€ 976 875

KUNGLIGA TEKNISKA HOEGSKOLAN

Sweden

EU Contribution

€ 564 612,50

LUNDS UNIVERSITET

Sweden

EU Contribution

€ 569 500

UNIVERSITAET BIELEFELD

Germany

EU Contribution

€ 409 031

FUNDACION TECNALIA RESEARCH & INNOVATION

Spain

EU Contribution

€ 462 500

Project information

Grant agreement ID: 644938

Status

Closed project

  • Start date

    1 March 2015

  • End date

    28 February 2018

Funded under:

H2020-EU.2.1.1.5.

  • Overall budget:

    € 4 037 266,25

  • EU contribution

    € 4 037 265,50

Coordinated by:

ABB AB

Sweden

This project is featured in...