Objetivo Buildings in Europe are responsible for more than 40% of total energy consumption and 25% of carbon emissions, mainly due to the high number of old housing stock with very poor insulation systems. This research will develop new energy efficient materials by engineering eco-lightweight granules (eco-LWG) to mitigate these problems. The eco-LWG will have high strength and high water absorption, ~100 wt.%, and be made from widely available waste materials: recycled mixed coloured glass, clay and limestone. The eco-LWG will be used to contain phase change materials (PCM), which use chemical bonds to store and release heat, allowing control of temperature fluctuations. The high level of porosity in the eco-LWG will allow them to absorb and retain much higher levels of PCM than has previously been possible using existing lightweight aggregates. Both the eco-LWG and the PCM loaded eco-LWG will be optimised by statistical design methodology and they will be used to develop new energy efficient construction products. Two impregnation methods will be compared to introduce the PCM into the eco-LWG: vacuum sorption to achieve maximum PCM uptake and short term immersion to partially fill the connected porosity. These will produce innovative lightweight and high heat-storage materials. Incorporating PCM loaded granules in mortars and other construction materials will result in reduced energy requirements to heat and cool buildings and improve indoor living conditions. The eco-LWG developed in this research will also be used in green roofs to provide water retention capacity and slow nutrient release. Green roofs can reduce the energy requirements of buildings and urban pollution. This multidisciplinary innovative research will deliver new energy efficient construction materials that can contribute to achieving the 2020 target of nearly zero-energy and highly material efficient buildings, which is an essential target to achieve sustainable growth in the EU. Ámbito científico engineering and technologymechanical engineeringmanufacturing engineeringengineering and technologymechanical engineeringthermodynamic engineeringheat engineeringengineering and technologymaterials engineeringnatural sciencesearth and related environmental sciencesenvironmental sciencespollution Palabras clave Lightweight material waste high water absorption statistical design methodology phase change material energy efficient material mortars building insulation green roofs Programa(s) H2020-EU.1.3. - EXCELLENT SCIENCE - Marie Skłodowska-Curie Actions Main Programme H2020-EU.1.3.2. - Nurturing excellence by means of cross-border and cross-sector mobility Tema(s) MSCA-IF-2014-EF - Marie Skłodowska-Curie Individual Fellowships (IF-EF) Convocatoria de propuestas H2020-MSCA-IF-2014 Consulte otros proyectos de esta convocatoria Régimen de financiación MSCA-IF - Marie Skłodowska-Curie Individual Fellowships (IF) Coordinador IMPERIAL COLLEGE OF SCIENCE TECHNOLOGY AND MEDICINE Aportación neta de la UEn € 183 454,80 Dirección SOUTH KENSINGTON CAMPUS EXHIBITION ROAD SW7 2AZ LONDON Reino Unido Ver en el mapa Región London Inner London — West Westminster Tipo de actividad Higher or Secondary Education Establishments Enlaces Contactar con la organización Opens in new window Sitio web Opens in new window Participación en los programas de I+D de la UE Opens in new window Red de colaboración de HORIZON Opens in new window Coste total € 183 454,80
