CORDIS

This report outlines the objectives, approach and actions that the consortium will target early on in the project. The final PUDF will provide the paths to further exploitation of project results, after the project is finished. The plan contains current and future dissemination activities as well as the plans of future commercialization and exploitation possibilities.

The second report of standardization and technology module platform will concentrate on the requirements and standards of the two-years project results, regarding the subsystems, system integration and system architectures for electric vehicles.

The third report of standardization and technology module platform will concentrate on the requirements and standards of the overall project results, regarding the subsystems, system integration and system architectures for electric vehicles.

The report will outline the disseminational activities and workshops aiming to esnsure the further exploitation of project results, thus reaching the wider audinece of the target users.

The first report outlines the input to standardization organizations in which te project partners are involved. The first report of standardization and technology module platform will concentrate on the requirements and standards of the first-year project results, regarding the subsystems, system integration and system architectures for electric vehicles.

3Ccar WEB portal established and operating; web portal will include a public part as well as a project internal part (document management system for achiving and exchanging data between partners). Project website is considered as living document with regular updates throughout the course of the project.

Inverse calculation of strain profiles from ETDR measurements using artificial neuronal networks

Author(s): H. Robin, K. Pawel, M. Niels

Published in: 2017

System on chip battery state estimator: E-bike case study

Author(s): Morello, R.; Di Rienzo, R.; Baronti, F.; Roncella, R.; Saletti, R.

Published in: Issue 2016, 2016

Damper-to-Damper Path Loss Characterization for Intra-Vehicular Wireless Sensor Networks

Author(s): C. A. M. Costa Júnior, H. Gao, T. Le Polain, R. van Dommele, B. Smolders, M. Dheans, P. Baltus

Published in: 2017

Modeling and control of ac electric drives during fault conditions

Author(s): M. Kozovsky, P. Blaha

Published in: 2017

Simulink generated control algorithm for nine-phase PMS motor

Author(s): M. Kozovsky, P. Blaha

Published in: 2017

Path Loss Characterization for Intra-Vehicular Wireless Sensor Networks

Author(s): C. Costa Junior, T.Le Polain et al.

Published in: European Conference on Antennas and Propagation (EUCAP2017), Issue March 2017, 2017

A Reconfigurable Receiver with 38 dB Frequency-Independent Blocker Suppression and Enhanced In-Band Linearity and Power Efficiency

Author(s): K. Ying, C. A. M. Costa Júnior, B. Wang, D. Milos

Published in: 2017

Electronic Module for the Thermal Monitoring of a Li-ion Battery Cell through the Electrochemical Impedance Estimation

Author(s): M. Ranieri, D, Alberto, H. Piret, V. Cattin

Published in: 2016

Sensor “conversion” by 3D Printing- A case study

Author(s): G. Moagăr-Poladian, C. Tibeică, V. Moagăr-Poladian

Published in: 2016

E-transportation: the role of embedded systems in electric energy transfer from grid to vehicle

Author(s): F. Baronti, M.-Y. Chow, C. Ma, H. Rahimi-Eichi, and R. Saletti

Published in: EURASIP Journal of Embedded Systems, Issue May 2016, 2016, Page(s) 11-12

Intelligent Torque Vectoring approach for Electric Vehicles with per-wheel motors

Author(s): A. Parra, A. Zubizarreta, J. Perez, M. Dendaluce

Published in: 2017

Integrated Model for Battery Electric Vehicles with Energy Harvesting Active Suspension System

Author(s): T.H. Pham, J. Jacob, S. Wilkins, C. Lauwerysy and M. Dhaens

Published in: 2016

Degradation mechanisms of C6/LiFePO4 batteries: experimental analysis of cycling-induced aging

Author(s): Li, Danilov, Gao, Yang, Notten

Published in: Electrochimica Acta Volume 210, Issue August 2016, 2016

Characterization of Damper-to-Damper Wireless Channel in Small Cars

Author(s): C. A. M. Costa Júnior, H. Gao, T. Le Polain, M. Dheans, P. Baltus

Published in: 2017

Advances in Li-Ion Battery Management for Electric Vehicles

Author(s): R. Morello, R. Di Rienzo, R. Roncella, R. Saletti, R. Schwarz, V.R.H. Lorentz, E.R.G. Hoedemaekers, B. Rosca, F. Baronti

Published in: 2016

Degradation mechanisms of C6/LiFePO4 batteries: experimental analysis of calendar aging

Author(s): Li, Danilov, Xie, Raijmakers, Gao, Yang, Notten

Published in: Electrochimica Acta Volume 190, Issue February 2016, 2016, Page(s) Elsevier B.V.

Characterization and Mission Profile Analysis of a SiC Hybrid Module for Main Inverter Application of Electric Vehicle

Author(s): A. P. Pai, T. Reiter, M. Maerz

Published in: 2017

Flux linkage characterization-based technique for cross-coupling effects compensation dealing with IPMSM sensorless control

Author(s): W. Zine, E. Monmasson, L. Idkhajine, A. Bruyere, B. Condamin, P.A. Chauvenet, L. Kobylanski

Published in: EURASIP Journal on Embedded Systems, Issue November 2016, 2016

Tuning of Moving Window Least Squares-based Algorithm for Online Battery Parameter Estimation

Author(s): R. Morello, R. Di Rienzo, R. Roncella, R. Saletti and F. Baronti

Published in: 2016

Model-order reduction of a nonlinear Lithium-ion battery model using proper orthogonal decompositions and discrete empirical interpolations

Author(s): Li, Donkers, Danilov, Bergveld

Published in: IEEE CDC, 2016

Classifying Test Suite Effectiveness via Model Inference and ROBBDs

Author(s): H. Felbinger, I. Pill, and F. Wotawa

Published in: Volume 9762 of the series Lecture Notes in Computer Science, Issue June 2016, 2016, Page(s) 76-93

Performances analysis of saliency-based sensorless control in low speed region and standstill for automotive applications

Author(s): W. Zine, E. Monmasson, L. Idkhajine, A. Bruyere, B. Condamin, P.A. Chauvenet

Published in: 2016

Benefits of new CoolSiC™ MOSFET in HybridPACK™ Drive package for electrical drive train applications

Author(s): W. Jakobi, A. Uhlemann, C. Schweiker, C. Strenger, A. Poonjal Pai, L. Beaurenaut, M. Thoben, M. Münzer

Published in: 2017

Testing Self-Adaptive Systems using Fault Injection and Combinatorial Testing

Author(s): F. Wotawa

Published in: To appear Proceedings of the Intl. Workshop on Verification and Validation of Adaptive Systems (VVASS 2016), Issue August 2016, 2016

Sensorless Battery Cell Temperature Estimation Circuit for Enhanced Safety in Battery Systems

Author(s): Radu Schwarz

Published in: Industrial Electronics Society, IECON 2015 - 41st Annual Conference of the IEEE, Issue November 2015, 2015

Mutation Score, Coverage, Model Inference: Quality Assessment for T-Way Combinatorial Test-Suites

Author(s): Felbinger, H.; Wotawa, F.; Nica, M.

Published in: 2017

Analytical surface charge method for rotated permanent magnets : boundary element method comparison and experimental validation

Author(s): van Dam, J.R.M., Paulides, J.J.H., Robertson, W.S.P., Dhaens, M. & Lomonova, E.A.

Published in: IEEE Transactions on Magnetics, Issue January 2016, 2016, Page(s) 1-8

Evaluation of comfort level and harvested energy in the vehicle using controlled damping

Author(s): V. Bucinskas, P. Mitrouchev, E. Sutinys, N. Sesok, I. Iljin, I. Morkvenaite-Vilkonciene

Published in: 2017

Characterization of the spatial resolution capability a novel carbon fiber strain sensor based on characteristic impedance measurements impedance

Author(s): Robin Höhne, Pavel Kostka, Niels Modler

Published in: AMA Conferences 2017, 2017

Damper-to-Damper Path Loss Characterization for Intra-Vehicular Wireless Sensor Networks

Author(s): Carlos A. M. Costa Júnior, Hao Gao, Thibault Le Polain, Rainier van Dommele, Bart Smolders, Miguel Dheans, Peter Baltus

Published in: 2017

Crosstalk interferences on impedance measurements in battery packs

Author(s): Raijmakers, L.H.J., Mundaragi Shivakumar, K., Donkers, M.C.F., Lammers, M.J.G. & Bergveld, H.J.

Published in: Proceedings of the IFAC International Symposium on Advances in Automotive Control (IFAC-PapersOnline), 2017, Page(s) pp. 42-47

Cyclic testing of novel carbon fiber based strain sensor with spatial resolution

Author(s): Robin Höhne, Pavel Kostka and Niels Modler

Published in: 2016

Characterization of the spatial resolution capability a novel carbon fiber strain sensor based on characteristic impedance measurements impedance

Author(s): Robin Höhne, Pavel Kostka, Niels Modler

Published in: AMA Conferences 2017, 2017

Design, control, and comparison of low-energy solenoid valve actuators

Author(s): J.R.M. van Dam, B.L.J. Gysen, M. Dhaens, E.A. Lomonova

Published in: INTERMAG 2018 : IEEE 2018 International Magnetics Conference, 2018, Page(s) 1-5

FPGA Master based on chip communications architecture for Cyclone V SoC running Linux

Author(s): R. Novickis, M. Greitān

Published in: 2018

An improved impedance-based temperature estimation method for Li-ion batteries

Author(s): Beelen, Raijmakers, Donkers, Notten, Bergveld

Published in: 4th IFAC Workshop on Engine and Powertrain Control, Simulation and Modeling E-COSM 2015 , Issue August 2015, 2015, Page(s) 383-388

Performance of Adaptive Filters for Predicting the Future Values of the Vehicle Sideslip Angle

Author(s): R.Shavelis, K.Ozols, M.Greitans, V.Fescenko

Published in: 2018

Electronic Module for the Thermal Monitoring of a Li-ion Battery Cell through the Electrochemical Impedance Estimation

Author(s): Marco Ranieri, Diego Alberto, Hélène Piret, Viviane Cattin

Published in: 22nd International Workshop on Thermal Investigations of ICs and Systems (THERMINIC), Issue September 2016, 2016

Predictive Thermal Management Strategy for Fast Charging Electric Vehicles

Author(s): Bogdan Rosca, Steven Wilkins

Published in: EVS31, 2018

Author(s): Felbinger Hermann; Wotawa Franz; Nica Mihai

Published in: Issue 3, 2017

DOI: 10.1109/AST.2016.015

Reducing Power Consumption of an Active Suspension System using Improved Control and/or Energy Harvesting Module

Author(s): T. Pham, S. Wilkins, C. Lauwerys, M. Dhaens

Published in: 26th Aachen Colloquium Automobile and Engine Technology 2017, 2017

User dependent aging prediction model for automotive controllers with power electronics

Author(s): S. Malipatlolla, A. Unutulmaz, D. Helms

Published in: 2017 27th International Symposium on Power and Timing Modeling, Optimization and Simulation (PATMOS), Issue September 2017, 2017

Machine and Actuator Design: Modeling 3-D Fields and Forces using the Analytical Surface Charge Expressions

Author(s): van Dam, J.R.M., Paulides, J.J.H., Dhaens, M. & Lomonova, E.A.

Published in: International Conference On Sustainable Mobility Applications, Renewables and Technology (SMART2015), Issue November 2015, 2015, Page(s) 1-5

Reducing Power Consumption of an Active Suspension System using Improved Control and/or Energy Harvesting Module

Author(s): T. Pham, S. Wilkins, C. Lauwerys, M. Dhaens

Published in: 26th Aachen Colloquium Automobile and Engine Technology 2017, 2017

Empirical Study of Correlation Between Mutation Score And Model Inference Based Test Suite Adequacy Assessment

Author(s): H. Felbinger, F.Wotawa, M.Nica

Published in: AST '16 Proceedings of the 11th International Workshop on Automation of Software Test, Issue May 2016, 2016, Page(s) 43-49

Comparison of soft-landing position control and energy minimization performance of two fluid-control solenoid valves

Author(s): J.R.M. van Dam, B.L.J. Gysen, M. Roes, E.A. Lomonova

Published in: EPE ’18 ECCE Europe: 20th European conference on power electronics and applications, 2018

Damper-to-Damper Path Loss Characterization for Intra-Vehicular Wireless Sensor Networks

Author(s): Carlos A. M. Costa Júnior, Hao Gao, Thibault Le Polain, Rainier van Dommele, Bart Smolders, Miguel Dheans, Peter Baltus

Published in: 2017

Joint state and parameter estimation for discrete-time polytopic linear parameter-varying systems

Author(s): Beelen, H.P.G.J. & Donkers, M.C.F.

Published in: Proceedings of the IFAC World Congress, 2017

Author(s): Federico Baronti, Mo-Yuen Chow, Chengbin Ma, Habiballah Rahimi-Eichi, Roberto Saletti

Published in: EURASIP Journal on Embedded Systems, Issue 2016/1, 2016, Page(s) 1-12, ISSN 1687-3963

DOI: 10.1186/s13639-016-0032-z

Author(s): H.P.G.J. Beelen, L.H.J. Raijmakers, M.C.F. Donkers, P.H.L. Notten, H.J. Bergveld

Published in: Applied Energy, Issue 175, 2016, Page(s) 128-140, ISSN 0306-2619

DOI: 10.1016/j.apenergy.2016.04.103

Author(s): Alberto Parra, Asier Zubizarreta, Joshué Pérez, Martín Dendaluce

Published in: Complexity, Issue 2018, 2018, Page(s) 1-14, ISSN 1076-2787

DOI: 10.1155/2018/7030184

3D Printed acceleration sensor: a case study

Author(s): G. Moagãr-Poladian, C. Tibeicã, V. Moagãr-Poladian

Published in: Romanian Journal of Information Science and Technology, Issue Vol. 21 No. 1, 2018, Page(s) 61-81, ISSN 1453-8245

A computationally efficient implementation of a full and reduced-order electrochemistry-based model for Li-Ion batteries

Author(s): Xia, L.; Najafi, E.; Li, Z.; Bergveld, H.J.; Donkers, M.C.F.

Published in: Applied Energy, Issue 2, 2017, Page(s) 208, ISSN 0306-2619

Author(s): Federico Baronti, Mo-Yuen Chow, Chengbin Ma, Habiballah Rahimi-Eichi, Roberto Saletti

Published in: EURASIP Journal on Embedded Systems, Issue 2016/1, 2016, Page(s) 1-12, ISSN 1687-3963

DOI: 10.1186/s13639-016-0032-z

Author(s): M. Kozovsky, P. Blaha

Published in: IFAC-PapersOnLine, Issue 51/6, 2018, Page(s) 384-389, ISSN 2405-8963

DOI: 10.1016/j.ifacol.2018.07.184