CORDIS
Forschungsergebnisse der EU

CORDIS

Deutsch DE
Development of ceramic and multi material components by additive manufacturing methods for personalized medical products

Development of ceramic and multi material components by additive manufacturing methods for personalized medical products

Ziel

The cerAMfacturing project will develop a completely new approach for ceramic multi material additive manufacturing which will allow series production of customised and multifunctional components for manifold applications for obtaining property combinations, like electrical conductive/electrical insulating, dense/porous or two-colored components. In five case studies demonstrators for personalized medical products – micro surgical tools, implants, and remedies – such as consumer products will be manufactured starting with the patient specific physical dimensions and ending with components validated under practically relevant conditions. For achieving these goals manifold tasks will be solved starting with method and device development. Especially suspension based additive manufacturing methods will be developed and qualified in cerAMfacturing, because this route promises a much better component performance in comparison to powder based methods. Multi material applications play a dominant role in the project. Beside ceramic/ceramic also ceramic/metal material combinations will be developed. For that purpose either additive manufacturing methods will be qualified or AM methods will be combined with conventional shaping routes like tape casting or ceramic injection moulding. The last mentioned combination of technologies will allow the individualisation of large series production components. Appropriate control methodologies to guarantee a high quality level of the custom made products will be implemented. The cerAMfacturing project will provide the technical equipment for combining AM steps with conventional ceramic shaping routes.
Leaflet | Map data © OpenStreetMap contributors, Credit: EC-GISCO, © EuroGeographics for the administrative boundaries

Koordinator

FRAUNHOFER GESELLSCHAFT ZUR FOERDERUNG DER ANGEWANDTEN FORSCHUNG E.V.

Adresse

Hansastrasse 27c
80686 Munchen

Deutschland

Aktivitätstyp

Research Organisations

EU-Beitrag

€ 1 080 625

Beteiligte (9)

Alphabetisch sortieren

Nach EU-Beitrag sortieren

Alles aufklappen

ADMATEC EUROPE BV

Niederlande

EU-Beitrag

€ 518 750

EYE-D APS

Dänemark

CERAMICX IRELAND LTD

Irland

EU-Beitrag

€ 251 507,50

HAGE SONDERMASCHINENBAU GMBH & CO KG

Österreich

EU-Beitrag

€ 320 625

MONTANUNIVERSITAET LEOBEN

Österreich

EU-Beitrag

€ 477 500

INMATEC TECHNOLOGIES GMBH

Deutschland

EU-Beitrag

€ 545 730

CERAMTEC GMBH

Deutschland

EU-Beitrag

€ 1 076 250

EUROGRANT GMBH

Deutschland

EU-Beitrag

€ 229 375

EYE-D INNOVATION APS

Dänemark

EU-Beitrag

€ 621 437

Projektinformationen

ID Finanzhilfevereinbarung: 678503

Status

Abgeschlossenes Projekt

  • Startdatum

    1 Oktober 2015

  • Enddatum

    30 September 2018

Finanziert unter:

H2020-EU.2.1.5.1.

  • Gesamtbudget:

    € 5 121 799,50

  • EU-Beitrag

    € 5 121 799,50

Koordiniert durch:

FRAUNHOFER GESELLSCHAFT ZUR FOERDERUNG DER ANGEWANDTEN FORSCHUNG E.V.

Deutschland

Dieses Projekt findet Erwähnung in ...