CORDIS
Resultados de investigaciones de la UE

CORDIS

Español ES
Rapid Reconfiguration of Flexible Production Systems through Capability-based Adaptation, Auto-configuration and Integrated tools for Production Planning

Rapid Reconfiguration of Flexible Production Systems through Capability-based Adaptation, Auto-configuration and Integrated tools for Production Planning

Objetivo

The requirements on production systems are continuously being shifted towards higher flexibility and adaptability. The ReCaM-project will demonstrate at TRL 7 a set of integrated tools for the rapid and autonomous reconfiguration of agile production systems, both at operational as well as managerial levels, integrated with the existing production planning and scheduling tools (MES). This approach is based on intelligent plug-and-produce capable self-describing mechatronic objects, which are able to auto-program and self-adjust to the required task by utilizing parametric capabilities. These next generation flexible production systems and the proposed set of enabling ICT tools will allow a rapid and cost-efficient reaction to dynamic market changes, also in small-lot production contexts, reducing the efforts needed to switch between product types and production quantities. ReCaM-solutions are expected to allow increasing the amount of variants and decreasing the lot sizes by 50% in an economically feasible way. Also, at least 30% reduction in set-up and changeover times and costs are expected. The integrated planning tool will take into consideration the energy consumption of the specific resources and try to minimize it by smart production scheduling, utilization of integrated operating-point switching of mechatronic objects, and reconfiguration. Thus, at least 5% reduction in energy consumption is anticipated. The project will ground on existing de-facto standards and specifications regarding reconfigurable system architectures, resource data models, control architectures and interfaces, and will provide and supplement new specifications for the missing aspects. The ReCaM consortium sees strong involvement of SME’s to RTD and demonstration activities and two end-users from major EU sectors, thus enabling proper exploitation of the demonstrated results worldwide.
Leaflet | Map data © OpenStreetMap contributors, Credit: EC-GISCO, © EuroGeographics for the administrative boundaries

Coordinador

ROBERT BOSCH GMBH

Dirección

Robert-Bosch-Platz 1
70839 Gerlingen-Schillerhoehe

Alemania

Tipo de actividad

Other

Aportación de la UE

€ 1 027 585

Participantes (9)

Ordenar alfabéticamente

Ordenar por aportación de la UE

Ampliar todo

FUNDACION TECNALIA RESEARCH & INNOVATION

España

Aportación de la UE

€ 577 250

POLITECNICO DI MILANO

Italia

Aportación de la UE

€ 609 375

TTY-SAATIO

Finlandia

TAMPEREEN KORKEAKOULUSAATIO SR

Finlandia

Aportación de la UE

€ 611 875

NXTCONTROL GMBH

Austria

Aportación de la UE

€ 537 950

COMPANIA ESPANOLA DE SISTEMAS AERONAUTICOS SA

España

Aportación de la UE

€ 504 525

DGH ROBOTICA, AUTOMATIZACION Y MANTENIMIENTO INDUSTRIAL SA

España

Aportación de la UE

€ 515 112,50

COSBERG SPA

Italia

Aportación de la UE

€ 581 000

ENGINSOFT SPA

Italia

Aportación de la UE

€ 338 187,50

Información del proyecto

Identificador del acuerdo de subvención: 680759

Estado

Proyecto cerrado

  • Fecha de inicio

    1 Noviembre 2015

  • Fecha de finalización

    31 Octubre 2018

Financiado con arreglo a:

H2020-EU.2.1.5.1.

  • Presupuesto general:

    € 6 804 728,75

  • Aportación de la UE

    € 5 302 860

Coordinado por:

ROBERT BOSCH GMBH

Alemania