Skip to main content

Studying Interfacial Dynamics by Interferometric Scattering

Periodic Reporting for period 1 - INTFACDYN (Studying Interfacial Dynamics by Interferometric Scattering)

Reporting period: 2016-06-01 to 2018-05-31

Nanoparticles at interfaces are a central research topic in colloidal science. They have various technological applications, related to, for example, emulsification, optical devices, and chemical catalysis. In addition, nanoparticles at interfaces make an ideal experimental model system for investigating topics in condensed matter physics.
The primary objective of this work was to utilize the unique imaging properties of scattering microscopy to directly visualize and thereby understand the fast dynamics of nanoparticles (NPs) at fluid-fluid interfaces. Specifically, this work has addressed the following questions: (i) What are the characteristics of inertial behaviour of NPs at fluid interfaces? (ii) Does bulk fluid inertia contribute to this behaviour? (iii) What is the adsorption dynamics of NPs to fluid-interfaces? (iv) Does fast dynamics of NPs at interfaces differ from slow dynamics and, if yes, how and in what way is it affected by time-scales? In addition to the specific questions listed above, the aim of this work was to develop an imaging platform based on scattering microscopy, and to establish it as a powerful tool to study high-speed dynamics of NPs in general with capabilities that are several orders of magnitude beyond what is currently possible with state-of-the-art single particle tracking approaches.
The work was focused on three major aspects: (a) Development of a robust protocol for generating an oil-water interface decorated with nanoparticles, and basic characterization of particle motion; (b) Construction of a high-speed total internal reflection scattering microscope; and (c) High-speed tracking and motion analysis of nanoparticles at fluid interfaces.
These tasks defined five milestones of the project, which were successfully achieved:
Milestone 1: The protocol for oil-water interfaces with nanoparticles was generated. Special emphasis was given to: preventing NP aggregation, the stability of the interface for a few hours (to allow sufficient time to probe it), cleanliness of the interface, and choice of oil which is refractive index-matched to glass as well as having the appropriate viscosity.
Milestone 2: Characterization of NP motion at low speed. This included the acquisition of movies, particle positioning and tracking, as well as basic motion analysis such as MSD and diffusion coefficient extraction.
Milestone 3: The TIR-scattering microscope was constructed. Originally we thought interferometric scattering microscopy (iSCAT) will be used to track the nanoparticles, however, TIR-scattering turned out to be more suitable for our experiments because of its intrinsic ability to image large fields of view.
Two approaches were taken, both of which were based on objective type-TIR; (i) two micromirrors (MM) that guide the illumination light into the objective and collect the reflected light from the interface, where the scattering light from the NPs is collected via a 45 mirror underneath the two MM, and (ii) central 45 rod mirror (RM) with diameter of 80% of the back focal plane of the objective, where the illumination and reflected light paths pass the sides of the RM. The two approaches were constructed and tested for sensitivity as well as precision and both showed excellent performance, with nm precision at exposure times shorter than 10 microseconds and large field-of-view of ~50x50 micrometres squared. We combined the two set-ups with a high-performance fast CMOS camera that we hired for the purpose of the experiments.
Milestone 4: Performing a series of experiments of nanoparticle diffusion at oil-water interfaces, varying the size and material of nanoparticles (20 and 30 nm in diameter, and gold and silver). In addition, we acquired movies with simultaneous fast (10-100 kHz) and slow (25-75 Hz) imaging speed so we could compare the dynamics at the two-time scales. In addition, we acquired movies capturing the landing (absorption) events of a nanoparticle to the oil-water interface.
Milestone 5: Advanced motion analysis of all experiments. This included characterization of displacement correlation as a function of length-scale at all the different conditions (fast vs low time-scales, different particles sizes and materials). In addition, an analysis of the single particle motion was performed to extract the effects of meta-stable states of NPs bound to the interface, as well as the dynamics when a particle is absorbed.

Our experiments revealed that fluid interfaces have a unique inertial response to perturbation at short-timescales, which is different than the inertial response of bulk fluids. This is surprising as the interface itself is a thin boundary layer between two bulk fluids. We showed that the response, which decays logarithmically and is anti-correlated at large distances, is a result of propagation of thermally-excited capillary waves at the interface. This unique behaviour disappears as the capillary waves decay, and therefore could not be captured at slow imaging.
Our experiments also revealed signatures of different stability states of NPs at fluid-interfaces. The dynamics at the single particle level showed that although the motion can be characterized as normal diffusion (or Brownian), it is not Gaussian, i.e. its Van Hove distribution exhibits features of different processes, rel
Our measurements are the first one to capture directly the fast dynamics of nanoparticles at fluid-fluid interfaces. The reason is mainly related to previous technical limitations of spatial and temporal resolution. The approach we took allowed characterizing the inertial behaviour at fluid-interfaces, as well as capturing the deviation from normal diffusion of the individual NPs. We anticipate that our results will encourage theoretical investigation of the behaviour we observed, expanding the understanding of nanoparticle dynamics at interfaces. In addition, the imaging approaches that were developed are useful for different types of experiments, requiring a simultaneous nm precision at short exposure time and large field-of-view (for example, DNA tethering) and we expect its utilization in other areas such as biophysics.
figure-intfacdyn-1.png