CORDIS
Forschungsergebnisse der EU

CORDIS

Deutsch DE

European Materials Modelling Council

Projektinformationen

ID Finanzhilfevereinbarung: 723867

Status

Abgeschlossenes Projekt

  • Startdatum

    1 September 2016

  • Enddatum

    31 August 2019

Finanziert unter:

H2020-EU.2.1.3.

  • Gesamtbudget:

    € 3 948 970,76

  • EU-Beitrag

    € 3 773 470,76

Koordiniert durch:

TECHNISCHE UNIVERSITAET WIEN

Österreich

Ziel

The aim of the EMMC-CSA is to establish current and forward looking complementary activities necessary to bring the field of materials modelling closer to the demands of manufacturers (both small and large enterprises) in Europe. The ultimate goal is that materials modelling and simulation will become an integral part of product life cycle management in European industry, thereby making a strong contribution to enhance innovation and competitiveness on a global level. Based on intensive efforts in the past two years within the European Materials Modelling Council (EMMC) which included numerous consultation and networking actions with representatives of all stakeholders including Modellers, Software Owners, Translators and Manufacturers in Europe, the EMMC identified and proposed a set of underpinning and enabling actions to increase the industrial exploitation of materials modelling in Europe
EMMC-CSA will pursue the following overarching objectives in order to establish and strengthen the underpinning foundations of materials modelling in Europe and bridge the gap between academic innovation and industrial application:
1. Enhance the interaction and collaboration between all stakeholders engaged in different types of materials modelling, including modellers, software owners, translators and manufacturers.
2. Facilitate integrated materials modelling in Europe building on strong and coherent foundations.
3. Coordinate and support actors and mechanisms that enable rapid transfer of materials modelling from academic innovation to the end users and potential beneficiaries in industry.
4. Achieve greater awareness and uptake of materials modelling in industry, in particular SMEs.
5. Elaborate Roadmaps that (i) identify major obstacles to widening the use of materials modelling in European industry and (ii) elaborate strategies to overcome them.
This EMMC-CSA stems directly out of the actions of the EMMC and will continue and build upon its existing activities.

Koordinator

TECHNISCHE UNIVERSITAET WIEN

Adresse

Karlsplatz 13
1040 Wien

Österreich

Aktivitätstyp

Higher or Secondary Education Establishments

EU-Beitrag

€ 593 092,69

Beteiligte (17)

FRAUNHOFER GESELLSCHAFT ZUR FOERDERUNG DER ANGEWANDTEN FORSCHUNG E.V.

Deutschland

EU-Beitrag

€ 432 420,84

GOLDBECK CONSULTING LIMITED

Vereinigtes Königreich

EU-Beitrag

€ 425 105,63

POLITECNICO DI TORINO

Italien

EU-Beitrag

€ 373 750

UPPSALA UNIVERSITET

Schweden

EU-Beitrag

€ 368 275

DOW BENELUX BV

Niederlande

EU-Beitrag

€ 72 250

ECOLE POLYTECHNIQUE FEDERALE DE LAUSANNE

Schweiz

STICHTING DUTCH POLYMER INSTITUTE

Niederlande

EU-Beitrag

€ 194 465

STIFTELSEN SINTEF

Norwegen

EU-Beitrag

€ 93 812,09

ACCESS e.V.

Deutschland

EU-Beitrag

€ 158 266,60

HELMHOLTZ-ZENTRUM GEESTHACHT ZENTRUM FUR MATERIAL- UND KUSTENFORSCHUNG GMBH

Deutschland

EU-Beitrag

€ 201 250

MATERIALS DESIGN SARL

Frankreich

EU-Beitrag

€ 221 412,50

QUANTUMWISE A/S

Dänemark

EU-Beitrag

€ 53 844,63

GRANTA DESIGN LTD

Vereinigtes Königreich

EU-Beitrag

€ 237 370

UNIVERSITY OF YORK

Vereinigtes Königreich

EU-Beitrag

€ 105 000

SINTEF AS

Norwegen

EU-Beitrag

€ 129 687,91

ALMA MATER STUDIORUM - UNIVERSITA DI BOLOGNA

Italien

EU-Beitrag

€ 85 000

SYNOPSYS DENMARK APS

Dänemark

EU-Beitrag

€ 28 467,87

Projektinformationen

ID Finanzhilfevereinbarung: 723867

Status

Abgeschlossenes Projekt

  • Startdatum

    1 September 2016

  • Enddatum

    31 August 2019

Finanziert unter:

H2020-EU.2.1.3.

  • Gesamtbudget:

    € 3 948 970,76

  • EU-Beitrag

    € 3 773 470,76

Koordiniert durch:

TECHNISCHE UNIVERSITAET WIEN

Österreich