CORDIS
EU research results

CORDIS

English EN
European Materials Modelling Council

European Materials Modelling Council

Objective

The aim of the EMMC-CSA is to establish current and forward looking complementary activities necessary to bring the field of materials modelling closer to the demands of manufacturers (both small and large enterprises) in Europe. The ultimate goal is that materials modelling and simulation will become an integral part of product life cycle management in European industry, thereby making a strong contribution to enhance innovation and competitiveness on a global level. Based on intensive efforts in the past two years within the European Materials Modelling Council (EMMC) which included numerous consultation and networking actions with representatives of all stakeholders including Modellers, Software Owners, Translators and Manufacturers in Europe, the EMMC identified and proposed a set of underpinning and enabling actions to increase the industrial exploitation of materials modelling in Europe
EMMC-CSA will pursue the following overarching objectives in order to establish and strengthen the underpinning foundations of materials modelling in Europe and bridge the gap between academic innovation and industrial application:
1. Enhance the interaction and collaboration between all stakeholders engaged in different types of materials modelling, including modellers, software owners, translators and manufacturers.
2. Facilitate integrated materials modelling in Europe building on strong and coherent foundations.
3. Coordinate and support actors and mechanisms that enable rapid transfer of materials modelling from academic innovation to the end users and potential beneficiaries in industry.
4. Achieve greater awareness and uptake of materials modelling in industry, in particular SMEs.
5. Elaborate Roadmaps that (i) identify major obstacles to widening the use of materials modelling in European industry and (ii) elaborate strategies to overcome them.
This EMMC-CSA stems directly out of the actions of the EMMC and will continue and build upon its existing activities.
Leaflet | Map data © OpenStreetMap contributors, Credit: EC-GISCO, © EuroGeographics for the administrative boundaries

Coordinator

TECHNISCHE UNIVERSITAET WIEN

Address

Karlsplatz 13
1040 Wien

Austria

Activity type

Higher or Secondary Education Establishments

EU Contribution

€ 593 092,69

Participants (17)

Sort alphabetically

Sort by EU Contribution

Expand all

FRAUNHOFER GESELLSCHAFT ZUR FOERDERUNG DER ANGEWANDTEN FORSCHUNG E.V.

Germany

EU Contribution

€ 432 420,84

GOLDBECK CONSULTING LIMITED

United Kingdom

EU Contribution

€ 425 105,63

POLITECNICO DI TORINO

Italy

EU Contribution

€ 373 750

UPPSALA UNIVERSITET

Sweden

EU Contribution

€ 368 275

DOW BENELUX BV

Netherlands

EU Contribution

€ 72 250

ECOLE POLYTECHNIQUE FEDERALE DE LAUSANNE

Switzerland

STICHTING DUTCH POLYMER INSTITUTE

Netherlands

EU Contribution

€ 194 465

STIFTELSEN SINTEF

Norway

EU Contribution

€ 93 812,09

ACCESS e.V.

Germany

EU Contribution

€ 158 266,60

HELMHOLTZ-ZENTRUM GEESTHACHT ZENTRUM FUR MATERIAL- UND KUSTENFORSCHUNG GMBH

Germany

EU Contribution

€ 201 250

MATERIALS DESIGN SARL

France

EU Contribution

€ 221 412,50

QUANTUMWISE A/S

Denmark

EU Contribution

€ 53 844,63

GRANTA DESIGN LTD

United Kingdom

EU Contribution

€ 237 370

UNIVERSITY OF YORK

United Kingdom

EU Contribution

€ 105 000

SINTEF AS

Norway

EU Contribution

€ 129 687,91

ALMA MATER STUDIORUM - UNIVERSITA DI BOLOGNA

Italy

EU Contribution

€ 85 000

SYNOPSYS DENMARK APS

Denmark

EU Contribution

€ 28 467,87

Project information

Grant agreement ID: 723867

Status

Ongoing project

  • Start date

    1 September 2016

  • End date

    31 August 2019

Funded under:

H2020-EU.2.1.3.

  • Overall budget:

    € 3 948 970,76

  • EU contribution

    € 3 773 470,76

Coordinated by:

TECHNISCHE UNIVERSITAET WIEN

Austria