CORDIS
EU research results

CORDIS

English EN
Innovative pre-fabricated components including different waste construction materials reducing building energy and minimising environmental impacts

Innovative pre-fabricated components including different waste construction materials reducing building energy and minimising environmental impacts

Objective

The basic idea is to embed the waste from building demolition (fragmented bricks, fragmented plaster or concrete, fragmented glasses, machined wood from windows frame or from wood beams after demolition etc.) in a geopolymer matrix to produce prefabricated panels for different use.
The main objective of InnoWEE is in fact the development of an optimized reuse of Construction and Demolition Waste (CDW) materials producing high add value prefabricated insulating and radiating panels to be used in energy efficient buildings.
The proposal is based on:
1) Recovery, selection and disassembling of CDW that will be characterized and eventually treated to yield suitable raw materials to be used for production of prefabricated components.
2) Development of new high performance prefabricated insulating geopolymeric panels for building walls envelopes and radiating panels for indoor wall and ceilings with low environmental impact, low embodied energy, low CO2 emissions, high thermal performance. Panels will be fabricated recycling cement, bricks, mortars, glass and wood reaching at least 30% of CDW.
3) To install the panels in demo sites characterized by different climate to evaluate their performance in terms of reducing energy use and minimizing environmental impacts.
4) To use an integrated design process and a holistic approach for the whole life cycle of the materials and components and produce a material that is cost effective, competitive, robust, reliable and low maintenance.
5) To create practical and sustainable building solutions that are easy to integrate into building designs, easy to install, take in consideration the needs of the stakeholders that strongly influence the market, and have been tested to meet all the current standards.

Coordinator

CONSIGLIO NAZIONALE DELLE RICERCHE

Address

Piazzale Aldo Moro 7
00185 Roma

Italy

Activity type

Higher or Secondary Education Establishments

EU Contribution

€ 810 000

Participants (10)

Sort alphabetically

Sort by EU Contribution

Expand all

PROIGMENES EREVNITIKES & DIAHIRISTIKES EFARMOGES

Greece

EU Contribution

€ 458 750

R.E.D. SRL

Italy

EU Contribution

€ 250 000

FUNDACION TECNALIA RESEARCH & INNOVATION

Spain

EU Contribution

€ 342 000

GUIDOLIN GIUSEPPE - ECO. G. SRL

Italy

EU Contribution

€ 182 500

PIETRE EDIL SRL

Romania

EU Contribution

€ 250 000

IZNAB SPOLKA Z OGRANICZONA ODPOWIEDZIALNOSCIA

Poland

EU Contribution

€ 358 500

ZAVOD ZA GRADBENISTVO SLOVENIJE

Slovenia

EU Contribution

€ 398 000

MAGNETTI BUILDING SRL

Romania

EU Contribution

€ 20 577,71

DIMOS VARIS - VOULAS - VOULIAGMENIS

Greece

EU Contribution

€ 50 000

MAGNETTI BUILDING SPA

Italy

EU Contribution

€ 240 672,29

Project information

Grant agreement ID: 723916

Status

Ongoing project

  • Start date

    1 October 2016

  • End date

    30 September 2020

Funded under:

H2020-EU.2.1.5.2.

  • Overall budget:

    € 3 361 000

  • EU contribution

    € 3 361 000

Coordinated by:

CONSIGLIO NAZIONALE DELLE RICERCHE

Italy