AffordabLe LIghtweight Automobiles AlliaNCE

Resultado final

Project identity: brand, marketing basics and website

Description of the corporate identity of ALLIANCE, implemented project website and basic dissemination materials

Open Lightweight Design Challenge final report

Report summarising the Open Lightweigth Design Challenge and its outcome

The ALLIANCE MODA

Modelling data documenting of the simulation Approach of WP 4; the MODA follows the guideline of the EMMC

Publicaciones

Analysis of yield locus description on springback behaviour of CR700Y980T-DP steel

Autores: M. Grubenmann, K. Barth, J. Heingärtner, N. Manopulo, P. Hora, A. Torkabadi, T. van den Boogaard, H. Rösen
Publicado en: IOP Science Conference Series: Materials Science and Engineering, 2018
Editor: IDDRG 2018

Lightweight Automobiles ALLIANCE project: first results of environmental and economic assessment from a Life-Cycle perspective

Autores: M. Delogu, F. Del Pero, L. Zanchi, M. Ierides , V. Fernández, K. Seidel, D. Thirunavukkarasu, T. Bein
Publicado en: 2018
Editor: SAE (Society of Automotive Engineers)

Extended Target Weighing Approach - Identification of lightweight design potential for new product generations

Autores: Albert Albers, Sven Revfi, Markus Spadinger
Publicado en: Proceedings of the 21st International Conference on Engineering Design (ICED17), Vancouver, Canada, 21.-25.08.2017., Edición Volume 4: Design Methods and Tools, 2017
Editor: The Design Society

Extended Target Weighing Approach – Estimation of technological uncertainties of concept ideas in product development processes

Autores: Albert Albers, Sven Revfi, Markus Spadinger
Publicado en: 2018
Editor: SAE International

Plasticity and fracture modeling of three-layer steel composite Tribond 1200 for crash simulation

Autores: Eller, T. K., Ramaker, K. A., Greve, L., Andres, M. T., Hazrati, J., van den Boogaard, A. H.
Publicado en: 36th International Deep Drawing Research Group Conference, IDDRG 2017, 2017
Editor: The International Deep Drawing Research Group

Virtual Development of a Plastic Rear Floor at the ALLIANCE Project

Autores: Benito, I. L., Dupont, V.
Publicado en: Materials in Car Body Engineering 2018, 2018
Editor: Automotive Circle

Friction characterization in hy-brid thermoforming of aluminum and GFRP

Autores: Grubenmann, Michael; Sachs, Ulrich; Akkerman, Remko; Heingärtner, Jörg; Hora, Pavel
Publicado en: Proceeding of the 13th International Conference on Numerical Methods in Industrial Forming Processes, June 23 - 27, 2019, Portsmouth, USA, 2019
Editor: Minerals, Metals & Materials Society

Design and Optimization of Mechatronic Systems Using a Holistic and Parametric Simulation Approach

Autores: Tamm, Christoph; Perfetto, Sara
Publicado en: Proc. of the 8th IFAC Symposium on Mechatronic Systems, September 4, 2019, Vienna, Austria, 2019
Editor: International Federation of Automatic Control

The Linear Interpolation Approach (LInA), an Extension to the Successive Response Surface Method

Autores: Timmer, Alexander; Immel, Rainer; Harzheim, Lothar
Publicado en: Proceedings of The 13th World Congress of Structural and Multidisciplinary Optimization (WCSMO-13), Beijing, China, May 20-24 2019, 2019
Editor: ISSMO

Target Weighing Approach: Study to evaluate the benefits of a methodical approach in compari-son to classical company processes for the identification of lightweight design potentials

Autores: Revfi, Sven; Albers, Albert; Stegmiller, Marcus
Publicado en: NordDesign 2018, August 14 – 17, 2018, 2018
Editor: Linköping University

Lightweight design approach for bumper systems by using thin-walled ultra-high-strength aluminium alloys within EU funded project ALLIANCE

Autores: Tölle, Jörn; Bohner, Friedrich
Publicado en: Proceedings of the European Aluminium Congress 2019, November 25 - 26, Düsseldorf, Germany, 2019
Editor: GDA

Efficient and Parametric Digital Twins for System Engineering Applications

Autores: Tamm, Christoph
Publicado en: Proceeding of NAFEMS: Better Products with Model Based Systems Engineering (MBSE) and CAE, November 14 - 15, 2018, Wiesbaden, Germany, 2018, ISBN 978-1-910643-16-7
Editor: NAFEMS

Extended Target Weighing Approach – A system lightweight design approach for new product generations

Autores: Albers, Albert; Revfi, Sven; Spadinger, Markus
Publicado en: 21st International Conference on Engineering Design (ICED17), Vancouver, Canada, 21.-25.08.2017., Edición Vol. 4: Design Methods and Tools, 2017
Editor: UNIVERSITY OF BRITISH COLUMBIA,

Virtual and experimental hybrid thermoforming of GFRP and aluminum

Autores: Grubenmann, Michael; Heingärtner, Jörg; Rieb, Arthur; Hora, Pavel
Publicado en: Proceeding of the 22nd International Conference on Composite Materials 2019, August 11 - 19, 2019, Melbourne, Australia, 2019
Editor: Australian Composite Structures Society

Influence of temperature on in-plane and out-of-plane mechanical behaviour of GFRP composite

Autores: M. Grubenmann, J. Heingärtner, P. Hora, D. Bassan
Publicado en: Journal of Physics: Conference Series, Edición 1063, 2018, Página(s) 012146, ISSN 1742-6588
Editor: Institute of Physics
DOI: 10.1088/1742-6596/1063/1/012146

Synergy Effects by using SysML Models for the Lightweight Design Method “Extended Target Weighing Approach”

Autores: Albert Albers, Georg Moeser, Sven Revfi
Publicado en: Procedia CIRP, Edición 70, 2018, Página(s) 434-439, ISSN 2212-8271
Editor: Elsevier
DOI: 10.1016/j.procir.2018.02.025

Cross-Component Material and Joining Selection for Functional Lightweight Design based on the Extended Target Weighing Approach - A Detailed Application Example

Autores: Jerome Kaspar, Sven Revfi, Albert Albers, Michael Vielhaber
Publicado en: Procedia CIRP, Edición 84, 2019, Página(s) 694-700, ISSN 2212-8271
Editor: Elsevier
DOI: 10.1016/j.procir.2019.04.192

Function-Based Material Selection for Cross-Component Lightweight Design Within the Extended Target Weighing Approach

Autores: Sven Revfi, Jerome Kaspar, Michael Vielhaber, Albert Albers
Publicado en: Proceedings of the Design Society: International Conference on Engineering Design, Edición 1/1, 2019, Página(s) 2715-2724, ISSN 2220-4342
Editor: Cambridge University Press
DOI: 10.1017/dsi.2019.278

Agile Lightweight Design - The Extended Target Weighing Approach in ASD - Agile Systems Design Using Functional Modelling with the C&C 2 -Approach

Autores: Albert Albers, Sven Matthiesen, Sven Revfi, Christopher Schönhoff, Patric Grauberger, Jonas Heimicke
Publicado en: Proceedings of the Design Society: International Conference on Engineering Design, Edición 1/1, 2019, Página(s) 2667-2676, ISSN 2220-4342
Editor: TU Delft
DOI: 10.1017/dsi.2019.273

Life Cycle Assessment in the automotive sector: a comparative case study of Internal Combustion Engine (ICE) and electric car

Autores: Francesco Del Pero, Massimo Delogu, Marco Pierini
Publicado en: Procedia Structural Integrity, Edición 12, 2018, Página(s) 521-537, ISSN 2452-3216
Editor: Elsevier
DOI: 10.1016/j.prostr.2018.11.066

Function-based benchmarking to identify competitor-based lightweight design potentials

Autores: Albert Albers, Sven Revfi, Frieder Kraus, Markus Spadinger
Publicado en: Procedia CIRP, Edición 84, 2019, Página(s) 526-531, ISSN 2212-8271
Editor: Elsevier
DOI: 10.1016/j.procir.2019.04.231

Lightweight Design Solutions in the Automotive Sector: Impact Analysis for a Door Structure

Autores: Francesco Del Pero, Massimo Delogu, Violeta Fernandez, Marcos Ierides, Kristian Seidel, Dinesh Thirunavukkarasu
Publicado en: Sustainable Design and Manufacturing 2019 - Proceedings of the 6th International Conference on Sustainable Design and Manufacturing (KES-SDM 19), Edición 155, 2019, Página(s) 77-88, ISBN 978-981-13-9270-2
Editor: Springer Singapore
DOI: 10.1007/978-981-13-9271-9_8

Funktionsbasierte Entwicklung leichter Produkte

Autores: Albers A, Revfi S, Spadinger M.
Publicado en: Handbuch Leichtbau: Methoden, Werkstoffe, Fertigung, 2020, Página(s) 131 - 151
Editor: Carl Hanser Verlag

Resultado final

Publicaciones

Compartir esta página

Descargar