Objective This proposal addresses the topic JTI-CS2-2015-CFP02-LPA-02-10 “Development of pultrusion manufacturing applications” from the CLEAN SKY 2 Call for Proposals 02.The project AeroPul is about the evaluation and demonstration of the pultrusion process for applications in an aerospace environment. Pultrusion process is a highly automated and continuous process capable of high manufacturing rates. The advantage of the pultrusion process is the combination of impregnation, forming and curing in a continuous process and therefore no autoclave is required. The project will demonstrate the pultrusion of curved reinforced profiles for primary and secondary structures.- Evaluation of carbon fibre textiles and resin system for the capability for pultrusion of primary and secondary aerospace structures- Manufacturing of two profiles to initially demonstrate the aerospace quality capability of the pultrusion process- Demonstration and evaluation of required mechanical performance, FST properties and quality inspection methods- Manufacturing a sample profile for secondary aircraft structures- Demonstration of the manufacturing of a representative curved part section for primary aircraft structure applications- Demonstration of the process robustness and the capability for high production rates- Demonstration of the capability to manufacture curved reinforced profiles by pultrusion Fields of science engineering and technologymechanical engineeringmanufacturing engineeringengineering and technologymaterials engineeringcompositesengineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraftengineering and technologymaterials engineeringtextilesnatural sciencesmathematicspure mathematicsgeometry Programme(s) H2020-EU.3.4. - SOCIETAL CHALLENGES - Smart, Green And Integrated Transport Main Programme H2020-EU.3.4.5.1. - IADP Large Passenger Aircraft Topic(s) JTI-CS2-2015-CFP02-LPA-02-10 - Development of pultrusion manufacturing applications Call for proposal H2020-CS2-CFP02-2015-01 See other projects for this call Funding Scheme CS2-IA - Innovation action Coordinator FASERINSTITUT BREMEN EV Net EU contribution € 441 500,00 Address AM BIOLOGISCHEN GARTEN 2 IW3 28359 BREMEN Germany See on map Region Bremen Bremen Bremen, Kreisfreie Stadt Activity type Research Organisations Links Contact the organisation Opens in new window Website Opens in new window Participation in EU R&I programmes Opens in new window HORIZON collaboration network Opens in new window Total cost € 441 500,00 Participants (1) Sort alphabetically Sort by Net EU contribution Expand all Collapse all THOMAS GMBH + CO. TECHNIK + INNOVATION KG Germany Net EU contribution € 264 950,00 Address WALKMUEHLENSTRASSE 93 27432 BREMERVOERDE See on map SME The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed. Yes Region Niedersachsen Lüneburg Rotenburg (Wümme) Activity type Private for-profit entities (excluding Higher or Secondary Education Establishments) Links Contact the organisation Opens in new window Participation in EU R&I programmes Opens in new window HORIZON collaboration network Opens in new window Total cost € 378 500,00