Brillouin Distributed sensor for Aeronautical Structures

Projektinformationen

BRIDAS

ID Finanzhilfevereinbarung: 717064

DOI 10.3030/717064

Abgeschlossenes Projekt

EK-Unterschriftsdatum 21 Juni 2016

Startdatum 1 Juli 2016

Enddatum 31 März 2019

Finanziert unter

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Gesamtkosten € 354 593,75

EU-Beitrag € 350 281,25

Koordiniert durch

UNIVERSITA DEGLI STUDI DELLA CAMPANIA LUIGI VANVITELLI
Italy

Ziel

The proposal is addressed to the development of a prototype for distributed strain measurements in optical fibers for industrial aeronautical contexts: composite manufacturing plants, structural test platforms and airborne conditions. The prototype will be based on stimulated Brillouin scattering (SBS), and will be aimed to the structural health monitoring of composite parts employed in the aeronautical industry. The developed prototype will have performance significantly superior to those offered by commercial SBS-based interrogation units. In particular, the prototype will have the following characteristics: (a) A spatial resolution of 5 mm; (b) A measurement range of 150 m; (c) A total weight less than 4.75 kg; (d) A specific software for each monitoring scenario, providing all relevant data in an effective and accessible way.
The developed sensor will implement a Brillouin Optical Frequency-Domain Analysis (BOFDA) configuration, characterized by the fact that measurements are carried out in the frequency domain The prototype will be assembled with Original Equipment Manufacturer (OEM) components, selected in order to minimize size and weight, in particular by making use of a vector network analyzer (VNA) operating up to 20 GHz. The prototype will be employed in the evaluation of quality and structural health of composite parts for the aeronautical industry, such as complete fuselage, wings, vertical or horizontal tail plane of passenger commercial aircrafts. By measuring the strain along optical fibers embedded into composite parts during their manufacture, damage detection will be possible both in the manufacturing stage and during service life. The developed system will be integrated into one typical industrial application that will be selected with the Topic Manager. At the end of the project, the delivered prototype will be validated based on the research context.

Wissenschaftliches Gebiet

• engineering and technology › materials engineering › fibers
• engineering and technology › mechanical engineering › vehicle engineering › aerospace engineering › aeronautical engineering
• engineering and technology › electrical engineering, electronic engineering, information engineering › information engineering › telecommunications › telecommunications networks › optical networks › fiber-optic network

Programm/Programme

• H2020-EU.3.4. - SOCIETAL CHALLENGES - Smart, Green And Integrated Transport Main Programme
• H2020-EU.3.4.5.4. - ITD Airframe

Thema/Themen

• JTI-CS2-2015-CFP02-AIR-02-12 - System development for optical fiber sensing technology measurements for industrial aeronautical contexts: composite manufacturing plants, structural test platforms and airborne conditions

Aufforderung zur Vorschlagseinreichung

H2020-CS2-CFP02-2015-01

Finanzierungsplan

CS2-IA - Innovation action

Koordinator

UNIVERSITA DEGLI STUDI DELLA CAMPANIA LUIGI VANVITELLI

• Netto-EU-Beitrag: € 135 100,00
• Adresse: VIALE ABRAMO LINCOLN 5 ; 81100 Caserta ; Italien
• Region: Sud › Campania › Caserta
• Aktivitätstyp: Higher or Secondary Education Establishments
• Gesamtkosten: € 135 100,00

Beteiligte (3)

CONSIGLIO NAZIONALE DELLE RICERCHE

Italien

• Netto-EU-Beitrag: € 135 156,25
• Adresse: PIAZZALE ALDO MORO 7 ; 00185 Roma
• Region: Centro (IT) › Lazio › Roma
• Aktivitätstyp: Research Organisations
• Gesamtkosten: € 135 156,25

UNIVERSIDAD REY JUAN CARLOS

Spanien

• Netto-EU-Beitrag: € 69 962,50
• Adresse: CALLE TULIPAN ; 28933 Mostoles
• Region: Comunidad de Madrid › Comunidad de Madrid › Madrid
• Aktivitätstyp: Higher or Secondary Education Establishments
• Gesamtkosten: € 69 962,50

OPTOSENSING SRL

Italien

• Netto-EU-Beitrag: € 10 062,50
• Adresse: VIA CARLO DE MARCO 69F ; 80137 NAPOLI
• KMU Die Organisation definierte sich zum Zeitpunkt der Unterzeichnung der Finanzhilfevereinbarung selbst als KMU (Kleine und mittlere Unternehmen). Ja:
  Region
  Sud › Campania › Napoli
• Region: Sud › Campania › Napoli
• Aktivitätstyp: Private for-profit entities (excluding Higher or Secondary Education Establishments)
• Gesamtkosten: € 14 375,00