CORDIS
EU research results

CORDIS

English EN
PJ22:Validation and Demonstration Engineering

PJ22:Validation and Demonstration Engineering

Objective

The aim of SESAR2020.PJ22 is to address one of the Transversal Activities, specifically Validation & Demonstration Engineering. In SESAR 1, the application of an engineering methodology defining the process for development of verification and validation platforms, was optionally mandated to the primary projects, leading to a different level of information available across the Programme. The delivery of information to SJU did not always reach the necessary consistency and quality, e.g. preventing the understanding of coverage and traceability of operational requirements vs. technical requirements. SE data were typically captured via Word templates requiring significant effort to extract the information with not homogeneous level of details thus insufficient to guarantee the usability and significance for the SESAR Community. In SESAR 2020 there is a demand to improve consistently the situation and PJ22 will provide a System Engineering Data Management Framework (SE-DMF), aiming to support all SESAR Solutions with a (web based) platform for Requirements Management to capture data in a structured way ensuring consistency, coherence and coverage at Programme level. PJ22 will develop an efficient approach based on a data-centric, data-driven rather than document-based paradigm. SE-DMF will be set up as a service and run in a secured IaaS infrastructure to enable cost reduction, high level of ROI, ease of use and scalability. The project will support the SESAR Solution Maturity Lifecycle and Gates.
Another challenge is to identify a set of strategic validation tools and interoperability solutions to improve the SESAR 2020 validation process. Maintaining and improving the development methodologies for the SESAR solution and VLSD projects together with managing the catalogue of the V&V and Demonstration Platforms and associated documentation describing their current capabilities and their planned evolution is under the scope of the project.
Leaflet | Map data © OpenStreetMap contributors, Credit: EC-GISCO, © EuroGeographics for the administrative boundaries

Coordinator

ENAV SPA

Address

Via Salaria 716
00138 Roma

Italy

Activity type

Private for-profit entities (excluding Higher or Secondary Education Establishments)

EU Contribution

€ 900 900

Participants (10)

Sort alphabetically

Sort by EU Contribution

Expand all

AIRBUS

France

EU Contribution

€ 194 999,88

VALSTYBES IMONE ORO NAVIGACIJA

Lithuania

EU Contribution

€ 392 023,52

DIRECTION DES SERVICES DE LA NAVIGATION AERIENNE

France

EU Contribution

€ 4 900

EUROCONTROL - EUROPEAN ORGANISATION FOR THE SAFETY OF AIR NAVIGATION

Belgium

LEONARDO - SOCIETA PER AZIONI

Italy

EU Contribution

€ 134 048,25

INDRA SISTEMAS SA

Spain

EU Contribution

€ 196 462,50

THALES LAS FRANCE SAS

France

EU Contribution

€ 227 999,63

RIZENI LETOVEHO PROVOZU CESKE REPUBLIKY STATNI PODNIK

Czechia

LETOVE PREVADZKOVE SLUZBY SLOVENSKEJ REPUBLIKY, STATNY PODNIK

Slovakia

POLSKA AGENCJA ZEGLUGI POWIETRZNEJ

Poland

Project information

Grant agreement ID: 734165

Status

Ongoing project

  • Start date

    1 October 2016

  • End date

    30 September 2019

Funded under:

H2020-EU.3.4.7.

  • Overall budget:

    € 3 355 719,30

  • EU contribution

    € 2 051 333,78

Coordinated by:

ENAV SPA

Italy