Friction stir processing based local damage mitigation and healing in aluminium alloys

Publikacje

Avoiding abnormal grain growth in thick 7XXX aluminium alloy friction stir welds during T6 post heat treatments

Autorzy: Matthieu B. Lezaack, Aude Simar
Opublikowane w: Materials Science and Engineering: A, Numer 807, 2021, Strona(/y) 140901, ISSN 0921-5093
Wydawca: Elsevier BV
DOI: 10.1016/j.msea.2021.140901

Efficient optimization methodology for laser powder bed fusion parameters to manufacture dense and mechanically sound parts validated on AlSi12 alloy

Autorzy: Julie Gheysen, Matthieu Marteleur, Camille van der Rest, Aude Simar
Opublikowane w: Materials & Design, Numer 199, 2021, Strona(/y) 109433, ISSN 0264-1275
Wydawca: Elsevier BV
DOI: 10.1016/j.matdes.2020.109433

Design of a metallic glass dispersion in pure copper by friction stir processing

Autorzy: Marie-Noëlle Avettand-Fènoël, Nelson Netto, Aude Simar, M. Marinova, Roland Taillard
Opublikowane w: Journal of Alloys and Compounds, Numer 27(6), 2022, Strona(/y) 164522, ISSN 0925-8388
Wydawca: Elsevier BV
DOI: 10.1016/j.jallcom.2022.164522

Manufacturing high strength aluminum matrix composites by friction stir processing: An innovative approach

Autorzy: Nelson Netto, Lv Zhao, Jeroen Soete, Grzegorz Pyka, Aude Simar
Opublikowane w: Journal of Materials Processing Technology, Numer 283, 2020, Strona(/y) 116722, ISSN 0924-0136
Wydawca: Elsevier BV
DOI: 10.1016/j.jmatprotec.2020.116722

A new physical simulation tool to predict the interface of dissimilar aluminum to steel welds performed by friction melt bonding

Autorzy: T. Sapanathan, N. Jimenez-Mena, I. Sabirov, M.A. Monclús, J.M. Molina-Aldareguía, P. Xia, L. Zhao, A. Simar
Opublikowane w: Journal of Materials Science & Technology, Numer 35/9, 2019, Strona(/y) 2048-2057, ISSN 1005-0302
Wydawca: Allerton Press Inc.
DOI: 10.1016/j.jmst.2019.05.004

Fatigue crack nucleation and growth in laser powder bed fusion AlSi10Mg under as built and post-treated conditions

Autorzy: Juan Guillermo Santos Macías, Chola Elangeswaran, Lv Zhao, Jean-Yves Buffière, Brecht Van Hooreweder, Aude Simar
Opublikowane w: Materials and Design, Numer 210, 110084, 2021, ISSN 0264-1275
Wydawca: Elsevier BV
DOI: 10.1016/j.matdes.2021.110084

Fostering crack deviation via local internal stresses in Al/NiTi composites and its correlation with fracture toughness

Autorzy: Lv Zhao, Lipeng Ding, Jeroen Soete, Hosni Idrissi, Greet Kerckhofs, Aude Simar
Opublikowane w: Composites Part A: Applied Science and Manufacturing, Numer 126, 2019, Strona(/y) 105617, ISSN 1359-835X
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2019.105617

Nanoscale periodic gradients generated by laser powder bed fusion of an AlSi10Mg alloy

Autorzy: Williams Lefebvre, Grégory Rose, Pauline Delroisse, Eric Baustert, Fabien Cuvilly, Aude Simar
Opublikowane w: Materials & Design, Numer 197, 2021, Strona(/y) 109264, ISSN 0264-1275
Wydawca: Elsevier BV
DOI: 10.1016/j.matdes.2020.109264

Unveiling damage sites and fracture path in laser powder bed fusion AlSi10Mg: Comparison between horizontal and vertical loading directions

Autorzy: Lv Zhao, Juan Guillermo Santos Macías, Thierry Douillard, Zhenhuan Li, Aude Simar
Opublikowane w: Materials Science and Engineering: A, Numer 807, 2021, Strona(/y) 140845, ISSN 0921-5093
Wydawca: Elsevier BV
DOI: 10.1016/j.msea.2021.140845

On the formation of antiphase boundaries in Fe4Al13 intermetallics during a high temperature treatment

Autorzy: Lipeng Ding, Thaneshan Sapanathan, Dominique Schryvers, Aude Simar, Hosni Idrissi
Opublikowane w: Scripta Materialia, Numer 215, 2022, Strona(/y) 114726, ISSN 1359-6462
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.scriptamat.2022.114726

Hot isostatic pressing of laser powder bed fusion AlSi10Mg: parameter identification and mechanical properties

Autorzy: Juan Guillermo Santos Macías; Lv Zhao; David Tingaud; Brigitte Bacroix; Grzegorz Pyka; Camille van der Rest; Laurence Ryelandt; Aude Simar
Opublikowane w: Journal of Materials Science, Vol. Special issue on Additive Manufacturing (2022), Numer 4, 2022, ISSN 1573-4803
Wydawca: Springer
DOI: 10.1007/s10853-022-07027-9

Understanding the ductility versus toughness and bendability decoupling of large elongated and fine grained Al 7475 - T6 alloy

Autorzy: Matthieu B. Lezaack, Florent Hannard, Aude Simar
Opublikowane w: Material Science and Engineering A, Numer 839, 2022, Strona(/y) 142816, ISSN 0921-5093
Wydawca: Elsevier BV
DOI: 10.1016/j.msea.2022.142816

On the complete interface development of Al/Cu magnetic pulse welding via experimental characterizations and multiphysics numerical simulations

Autorzy: Jisuai S. Li, Thaneshan Sapanathan, R.N. Raoelison, Y.L. Hou, Aude Simar, M. Rachik
Opublikowane w: Journal of Materials Processing Technology, Numer 296, 117185, 2021, ISSN 0924-0136
Wydawca: Elsevier BV
DOI: 10.1016/j.jmatprotec.2021.117185

Damage mechanisms in selective laser melted AlSi10Mg under as built and different post-treatment conditions

Autorzy: Lv Zhao, Juan Guillermo Santos Macías, Lipeng Ding, Hosni Idrissi, Aude Simar
Opublikowane w: Materials Science and Engineering: A, Numer 764, 2019, Strona(/y) 138210, ISSN 0921-5093
Wydawca: Elsevier BV
DOI: 10.1016/j.msea.2019.138210

Influence on microstructure, strength and ductility of build platform temperature during laser powder bed fusion of AlSi10Mg

Autorzy: Juan Guillermo Santos Macías, Thierry Douillard, Lv Zhao, Eric Maire, Grzegorz Pyka, Aude Simar
Opublikowane w: Acta Materialia, Numer 201, 2020, Strona(/y) 231-243, ISSN 1359-6454
Wydawca: Elsevier BV
DOI: 10.1016/j.actamat.2020.10.001

A new healing strategy for metals: Programmed damage and repair

Autorzy: Mariia Arseenko, Florent Hannard, Lipeng Ding, Lv Zhao, Eric Maire, Julie Villanova, Hosni Idrissi and Aude Simar
Opublikowane w: Acta Materialia, Numer 238, 2022, Strona(/y) 118241, ISSN 1359-6454
Wydawca: Elsevier BV
DOI: 10.1016/j.actamat.2022.118241

Mean-field model analysis of deformation and damage in friction stir processed Mg-C composites

Autorzy: Aude Simar, Anne Mertens, Sophie Ryelandt, Francis Delannay, Laurence Brassart
Opublikowane w: Materials Science and Engineering: A, Numer 723, 2018, Strona(/y) 324-333, ISSN 0921-5093
Wydawca: Elsevier BV
DOI: 10.1016/j.msea.2018.03.043

On the Prediction of Hot Tearing in Al-to-Steel Welding by Friction Melt Bonding

Autorzy: N. Jimenez-Mena, P. J. Jacques, J. M. Drezet, A. Simar
Opublikowane w: Metallurgical and Materials Transactions A, Numer 49/7, 2018, Strona(/y) 2692-2704, ISSN 1073-5623
Wydawca: ASM International
DOI: 10.1007/s11661-018-4618-z

Compression behavior of lattice structures produced by selective laser melting: X-ray tomography based experimental and finite element approaches

Autorzy: Yasin Amani, Sylvain Dancette, Pauline Delroisse, Aude Simar, Eric Maire
Opublikowane w: Acta Materialia, Numer 159, 2018, Strona(/y) 395-407, ISSN 1359-6454
Wydawca: Elsevier BV
DOI: 10.1016/j.actamat.2018.08.030

Residual stresses of friction melt bonded aluminum/steel joints determined by neutron diffraction

Autorzy: N. Jimenez-Mena, T. Sapanathan, J.M. Drezet, T. Pirling, P.J. Jacques, A. Simar
Opublikowane w: Journal of Materials Processing Technology, Numer 266, 2019, Strona(/y) 651-661, ISSN 0924-0136
Wydawca: Elsevier BV
DOI: 10.1016/j.jmatprotec.2018.11.030

Ductilisation and fatigue life enhancement of selective laser melted AlSi10Mg by friction stir processing

Autorzy: Juan Guillermo Santos Macías, Chola Elangeswaran, Lv Zhao, Brecht Van Hooreweder, Jérôme Adrien, Eric Maire, Jean-Yves Buffière, Wolfgang Ludwig, Pascal J. Jacques, Aude Simar
Opublikowane w: Scripta Materialia, Numer 170, 2019, Strona(/y) 124-128, ISSN 1359-6462
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.scriptamat.2019.05.044

On the interplay between intermetallic controlled growth and hot tearing susceptibility in Al-to-steel welding with additional interlayers

Autorzy: N. Jimenez-Mena, A. Simar, P.J. Jacques
Opublikowane w: Materials & Design, Numer 180, 2019, Strona(/y) 107958, ISSN 0264-1275
Wydawca: Elsevier BV
DOI: 10.1016/j.matdes.2019.107958

Unveiling the impact of the effective particles distribution on strengthening mechanisms: A multiscale characterization of Mg+Y2O3 nanocomposites

Autorzy: C. Mallmann, F. Hannard, E. Ferrié, A. Simar, R. Daudin, P. Lhuissier, A. Pacureanu, M. Fivel
Opublikowane w: Materials Science and Engineering: A, Numer 764, 2019, Strona(/y) 138170, ISSN 0921-5093
Wydawca: Elsevier BV
DOI: 10.1016/j.msea.2019.138170

Ductilization of selective laser melted Ti6Al4V alloy by friction stir processing

Autorzy: Chunjie Huang, Xingchen Yan, Lv Zhao, Min Liu, Wenyou Ma, Weibing Wang, Jeroen Soete, Aude Simar
Opublikowane w: Materials Science and Engineering: A, Numer 755, 2019, Strona(/y) 85-96, ISSN 0921-5093
Wydawca: Elsevier BV
DOI: 10.1016/j.msea.2019.03.133

Enhancement of toughness of Al-to-steel Friction Melt Bonded welds via metallic interlayers

Autorzy: Norberto Jimenez-Mena, Pascal J. Jacques, Lipeng Ding, Nicolas Gauquelin, Dominique Schryvers, Hosni Idrissi, Francis Delannay, Aude Simar
Opublikowane w: Materials Science and Engineering: A, Numer 740-741, 2019, Strona(/y) 274-284, ISSN 0921-5093
Wydawca: Elsevier BV
DOI: 10.1016/J.MSEA.2018.10.101

Comparison of residual stresses obtained by the crack compliance method for parts produced by different metal additive manufacturing techniques and after friction stir processing

Autorzy: Lv Zhao, Juan Guillermo Santos Macías, Adrien Dolimont, Aude Simar, Edouard Rivière-Lorphèvre
Opublikowane w: Additive Manufacturing, Numer 36, 2020, Strona(/y) 101499, ISSN 2214-8604
Wydawca: Elsevier BV
DOI: 10.1016/j.addma.2020.101499

Property prediction and crack growth behavior in cold sprayed Cu deposits

Autorzy: Chunjie Huang, Mariia Arseenko, Lv Zhao, Yingchun Xie, Andreas Elsenberg, Frank Gaertner, Aude Simar, Thomas Klassen
Opublikowane w: Materials and Design, Numer 206, 109826, 2021, ISSN 0264-1275
Wydawca: Elsevier BV
DOI: 10.1016/j.matdes.2021.109826

High temperature in situ SEM assessment followed by ex situ AFM and EBSD investigation of the nucleation and early growth stages of Fe-Al intermetallics

Autorzy: T. Sapanathan, I. Sabirov, P. Xia, M.A. Monclús, J.M. Molina-Aldareguía, P.J. Jacques, A. Simar
Opublikowane w: Scripta Materialia, Numer 200, 2021, Strona(/y) 113910, ISSN 1359-6462
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.scriptamat.2021.113910

Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution

Autorzy: A. Heidarzadeh, S. Mironov, R. Kaibyshev, G. Çam, A. Simar, A. Gerlich, F. Khodabakhshi, A. Mostafaei, D.P. Field, J.D. Robson, A. Deschamps, P.J. Withers
Opublikowane w: Progress in Materials Science, 2020, Strona(/y) 100752, ISSN 0079-6425
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.pmatsci.2020.100752

Microstructure and loading direction dependent hardening and damage behavior of laser powder bed fusion AlSi10Mg

Autorzy: Lubin Song, Lv Zhao, Lipeng Ding, Yaxin Zhu, Minsheng Huang, Aude Simar, Zhenhuan Li
Opublikowane w: Material Science and Engineering A, Numer 2022, 832, 2022, Strona(/y) 142484, ISSN 0921-5093
Wydawca: Elsevier BV
DOI: 10.1016/j.msea.2021.142484

Towards ductilization of high strength 7XXX aluminium alloys via microstructural modifications obtained by friction stir processing and heat treatments

Autorzy: Matthieu Baudouin Lezaack; Florent Hannard; Lv Zhao; Lv Zhao; A. Orekhov; A. Orekhov; Jérôme Adrien; Arttu Miettinen; Arttu Miettinen; Arttu Miettinen; Hosni Idrissi; Hosni Idrissi; Aude Simar
Opublikowane w: Materialia, Numer 101248, 2021, ISSN 2589-1529
Wydawca: Elsevier
DOI: 10.1016/j.mtla.2021.101248

Combined numerical and experimental estimation of the fracture toughness and failure analysis of single lap shear test for dissimilar welds

Autorzy: Norberto Jimenez-Mena; Thaneshan Sapanathan; Pascal Jacques; Aude Simar
Opublikowane w: Engineering Fracture Mechanics, Numer 249, 107756, 2021, ISSN 0013-7944
Wydawca: Pergamon Press Ltd.
DOI: 10.48550/arxiv.2104.13506

Review on the correlation between microstructure and mechanical performance for laser powder bed fusion AlSi10Mg

Autorzy: Lv Zhao, Lubin Song, Juan Guillermo Santos Macías, Yaxin Zhu, Minsheng Huang, Aude Simar, Zhenhuan Li
Opublikowane w: Additive Manufacturing, Numer 56, 2022, Strona(/y) 102914, ISSN 2214-8604
Wydawca: Elsevier BV
DOI: 10.1016/j.addma.2022.102914

Friction Stir Processing for Architectured Materials

Autorzy: Aude Simar, Marie-Noëlle Avettand-Fènoël
Opublikowane w: Architectured Materials in Nature and Engineering - Archimats, Numer 282, 2019, Strona(/y) 195-229, ISBN 978-3-030-11941-6
Wydawca: Springer International Publishing
DOI: 10.1007/978-3-030-11942-3_7

Lightening the load of aluminium alloys, vulgarisation paper

Autorzy: Aude Simar
Opublikowane w: EU Researcher, Numer summer 2020, 2020, Strona(/y) 59
Wydawca: EU Researcher

Extended durability for high strength aluminium alloys, vulgarisation paper

Autorzy: Aude Simar, Florent Hannard, Matthieu B. Lezaack, Juan Guillermo Santos Macías, Lv Zhao, Grzegorz Pyka
Opublikowane w: Innovation News Network, Numer Numer 4, 2020
Wydawca: The Innovation Platform

Wyszukiwanie danych OpenAIRE...

Publikacje

Udostępnij tę stronę

Pobierz