Hybrid Fixed Leading Edge

Projektinformationen

HFLE

ID Finanzhilfevereinbarung: 738205

DOI 10.3030/738205

Abgeschlossenes Projekt

EK-Unterschriftsdatum 23 Januar 2017

Startdatum 1 Februar 2017

Enddatum 31 Dezember 2019

Finanziert unter

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Gesamtkosten € 1 316 857,50

EU-Beitrag € 999 176,63

Koordiniert durch

COEXPAIR SA
Belgium

Ziel

The proposal is adressing the topic JTI-CS2-2016-CFP03-LPA01-14 Automated injection RTM system process based on innovative sensor technologies in a low cost smart manufacturing tooling prototype and any tooling involved in the manufacture or the validation of the structure.
The final objective of this topic is to produce the needed tooling to manufacture the HTP Leading edge structure (modified to include a HLFC system) using liquid resin injection processes, in particular RTM process to produce the mentioned part. The resulting structure shall comply with the actual regulation of the aerospace sector, in particular regarding geometrical tolerances and defects.
Coexpair is the leader of this project, the other partners are Tecnalia, Pégard Productics and University of Liège. In order to produce the needed tooling to manufacture the HTP Leading edge structure, 5 elementary technology blocs are defined as objectives : 1°) low cost/ natural materials employed in the tooling manufactured, 2°) eco-design for of the tooling manufactured, 3°) energy savings during the manufacture processes of the future parts, 4°) manufacturing processes simplification in order to improve the repetitiveness of the process, 5°) production time savings to reduce the cost and production lead times. A “quick” specimen was manufactured prior to project submission to show the RTM process is suitable for the project. The project focuses on the automation of manufacturing steps of RTM process, including ply cutting and mold cleaning. Elementary tests of a few key points of the automation will be performed in industrial environment (Coexpair shop). In order to optimize floor shop organization, work flow simulation will be performed. In addition to Coexpair experience on RTM process and mold design, the consortium gathers experience in complex part mold machining, experience in robotic development and preforming automation. The project is planned within a duration of 24 months.

Wissenschaftliches Gebiet

• engineering and technology › mechanical engineering › vehicle engineering › aerospace engineering › aircraft
• social sciences › sociology › industrial relations › automation
• engineering and technology › mechanical engineering › manufacturing engineering › subtractive manufacturing
• engineering and technology › electrical engineering, electronic engineering, information engineering › electronic engineering › sensors
• engineering and technology › mechanical engineering › vehicle engineering › aerospace engineering › aeronautical engineering

Programm/Programme

• H2020-EU.3.4. - SOCIETAL CHALLENGES - Smart, Green And Integrated Transport Main Programme
• H2020-EU.3.4.5.1. - IADP Large Passenger Aircraft

Thema/Themen

• JTI-CS2-2016-CFP03-LPA-01-14 - Automated injection RTM system process based in innovative sensor technologies in a low cost smart manufacturing tooling prototype and any tooling involved in the manufacture or the validation of the structure

Aufforderung zur Vorschlagseinreichung

H2020-CS2-CFP03-2016-01

Finanzierungsplan

CS2-IA - Innovation action

Koordinator

COEXPAIR SA

• Netto-EU-Beitrag: € 433 031,38
• Adresse: RUE DES ENTREPRENEURS 10 ; 5020 Namur ; Belgien
• KMU Die Organisation definierte sich zum Zeitpunkt der Unterzeichnung der Finanzhilfevereinbarung selbst als KMU (Kleine und mittlere Unternehmen). Ja:
  Region
  Région wallonne › Prov. Namur › Arr. Namur
• Region: Région wallonne › Prov. Namur › Arr. Namur
• Aktivitätstyp: Private for-profit entities (excluding Higher or Secondary Education Establishments)
• Gesamtkosten: € 618 616,25

Beteiligte (3)

PEGARD PRODUCTICS

Belgien

• Netto-EU-Beitrag: € 308 224,00
• Adresse: AVENUE REINE ELISABETH 59 ; 5300 ANDENNE
• KMU Die Organisation definierte sich zum Zeitpunkt der Unterzeichnung der Finanzhilfevereinbarung selbst als KMU (Kleine und mittlere Unternehmen). Ja:
  Region
  Région wallonne › Prov. Namur › Arr. Namur
• Region: Région wallonne › Prov. Namur › Arr. Namur
• Aktivitätstyp: Private for-profit entities (excluding Higher or Secondary Education Establishments)
• Gesamtkosten: € 440 320,00

UNIVERSITE DE LIEGE

Belgien

• Netto-EU-Beitrag: € 129 375,00
• Adresse: PLACE DU 20 AOUT 7 ; 4000 Liege
• Region: Région wallonne › Prov. Liège › Arr. Liège
• Aktivitätstyp: Higher or Secondary Education Establishments
• Gesamtkosten: € 129 375,00

FUNDACION TECNALIA RESEARCH & INNOVATION

Spanien

• Netto-EU-Beitrag: € 128 546,25
• Adresse: PARQUE CIENTIFICO Y TECNOLOGICO DE GIPUZKOA, PASEO MIKELETEGI 2 ; 20009 DONOSTIA-SAN SEBASTIAN (GIPUZKOA)
• Region: Noreste › País Vasco › Gipuzkoa
• Aktivitätstyp: Research Organisations
• Gesamtkosten: € 128 546,25