Obiettivo Inspection robots are more and more frequently used in industry for quality control of parts with complex shape. The main concept is to move a sensor over the surface of the part so that all relevant areas are inspected. The problem, known as coverage planning, requires generic solutions for key challenges like collision avoidance, motion planning and calibration and synchronization of robot motion and real-time measurement data acquisition. The deployment of such inspection robots is currently done manually or with semi-automatic motion-planning/calibration technologies. These inspection processes have been proved to be difficult, time-consuming and – consequently – expensive.IT+Robotics objective is to develop a generic framework that solves the coverage and path planning problem for inspection tasks with constraints like: inspecting sensor needs to move continuously over the part, the part is handled by limited multi-axis handling system (e.g. 6 axes or Cartesian robot).Robotic inspection systems are needed (1) wherever parts of complex shape need to be inspected, mainly in aerospace and automotive industry; (2) wherever a flexible and easy to use solution needs to deal with small batches of products with different shapes (particularly for SMEs). Moreover, the product can reach all the markets related to those industrial processes that need the full coverage of the product. The results will be also applied to other industrial processes requiring full coverage of the product, such as paint or shot peening robots.Since there is a huge potential in both robotics inspection and application, IT+Robotics would like to recruit an Innovation Associate with two objectives. The former is support the development of a generic framework for ITR products related to full coverage applications. The latter is to improve the continuous innovation process inside the company. Campo scientifico engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensorsoptical sensorssocial scienceseconomics and businessbusiness and managementinnovation managementengineering and technologymechanical engineeringvehicle engineeringautomotive engineeringnatural sciencesphysical sciencesopticsengineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringrobotics Programma(i) H2020-EU.2.3. - INDUSTRIAL LEADERSHIP - Innovation In SMEs Main Programme H2020-EU.2.3.2.2. - Enhancing the innovation capacity of SMEs Argomento(i) INNOSUP-02-2016 - European SME innovation Associate - pilot Invito a presentare proposte H2020-INNOSUP-2016-2017 Vedi altri progetti per questo bando Bando secondario H2020-INNOSUP-02-2016 Meccanismo di finanziamento CSA - Coordination and support action Coordinatore IT+ROBOTICS SRL Contribution nette de l'UE € 115 625,00 Indirizzo CONTRA VALMERLARA 21 CAP 36100 Vicenza Italia Mostra sulla mappa PMI L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione. Sì Regione Nord-Est Veneto Vicenza Tipo di attività Private for-profit entities (excluding Higher or Secondary Education Establishments) Collegamenti Contatta l’organizzazione Opens in new window Sito web Opens in new window Partecipazione a programmi di R&I dell'UE Opens in new window Rete di collaborazione HORIZON Opens in new window Costo totale € 115 625,00
