CORDIS
Resultados de investigaciones de la UE

CORDIS

Español ES

Dielectric MicroSpacer Technology

Objetivo

Several technological applications need tools for keeping a stable micrometric distance between two surfaces. The requirements are more stringent if electrical insulation has to be guaranteed between the surfaces and even more if also thermal insulation has to be satisfied.
The dielectric microspacers (DMSs) here described represent a microtechnology able to meet all these requirements. DMSs were developed in the ProME3ThE2US2 FET project to separate two electrodes of an innovative high-temperature solar cell prototype. Since that device is part of the wider set of thermionic energy converters (TECs), DMS technology can be successfully applied to them, thus solving a technical problem only mitigated by palliative solutions during the last 50 years.
The potentials connected to DMS technological innovation are scalability, robustness, high resolution, fabrication on large areas, thermal resistance and stability, very high electric and thermal resistivity, uniformity of physical properties, versatility of arrangement, and very accurate control of the separation gap.
As mentioned, the immediate application is in TECs, initially for nuclear and aerospace applications and subsequently for allowing their introduction in the enormously increasing sector of industrial waste heat recovery. Application is expected also in fabrication of electronic devices.
However, since new devices require effective and performing tools, in the same way as new tools open new perspectives for hi-tech devices, novel applications can be imagined. With this aim, DMS project starts with a critical study on possible complementary applications as well as on technical limitations and improvements. This activity will be preparatory for protecting the intellectual property in the widest possible application domain. A second phase will focus on technology transfer by qualifying and quantifying the possible market(s) and actors, aimed at defining an effective exploitation plan and promotion strategy.
Leaflet | Map data © OpenStreetMap contributors, Credit: EC-GISCO, © EuroGeographics for the administrative boundaries

Coordinador

CONSIGLIO NAZIONALE DELLE RICERCHE

Dirección

Piazzale Aldo Moro 7
00185 Roma

Italia

Tipo de actividad

Research Organisations

Aportación de la UE

€ 58 125

Participantes (1)

Ordenar alfabéticamente

Ordenar por aportación de la UE

Ampliar todo

IONFLY VACUUM AND PLASMA TECHNOLOGY SRL

Italia

Aportación de la UE

€ 41 875

Información del proyecto

Identificador del acuerdo de subvención: 754568

  • Fecha de inicio

    1 Abril 2017

  • Fecha de finalización

    30 Septiembre 2018

Financiado con arreglo a:

H2020-EU.1.2.1.

  • Presupuesto general:

    € 100 000

  • Aportación de la UE

    € 100 000

Coordinado por:

CONSIGLIO NAZIONALE DELLE RICERCHE

Italia