Obiettivo "WATEC project deals with the design, fabrication, ""on-field"" testing and commercialization of an innovative hydro-turbine able to convert into electricity the kinetic and potential energy of waves and the kinetic energy of tidal streams. The technology works in three ways:1- it converts the kinetic energy of tidal streams by applying an undershoot waterwheel principle utilising a flow diverter to accelerate and redirect flow under the rotor;2- this deflector also redirects waves onto the upper platform where an overtopping principle converts wave potential energy as flow drains past the side of the rotor;3- a similar approach and flow path is used to capture wave kinetic energy.Thanks to the simultaneous exploitation of both potential and kinetic waves and kinetic tidal hydro-energy in a compact plant and to the technology design optimization, WATEC leads to a industry leading LCOE of 71 €/MWh, much lower than the competing solution for low-head hydropower conversion (100÷270 €/kWh ).The HP plant floating structure is semi-submersible utilising a taut mooring principle and anchor cable shock absorbers to minimise wave impact forces. This approach also eliminates the need for: -) voltage limiting ‘wet mate’ inductive couplings; -) expensive subsea interventions for maintenance and defouling; -) expensive subsea construction techniques.The technology has a low environmental impact (no piling for the deployment of the deadweight anchors and limited seabed trenching are required), an easy installation, a low visual impact in comparison to industry alternatives (it protrudes 10 meters above water level), a full material recovery during the decommissioning process.By WATEC, low-head hydropower sector will be revolutionized as it will be possible to apply a technology able to make competitive damless HP, thus dramatically enlarging the HP application potentialities." Campo scientifico engineering and technologyenvironmental engineeringenergy and fuelsrenewable energyhydroelectricitymarine energytidal energy Programma(i) H2020-EU.3.3. - SOCIETAL CHALLENGES - Secure, clean and efficient energy Main Programme H2020-EU.2.1.1. - INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Information and Communication Technologies (ICT) H2020-EU.2.3.1. - Mainstreaming SME support, especially through a dedicated instrument Argomento(i) SMEInst-09-2016-2017 - Stimulating the innovation potential of SMEs for a low carbon and efficient energy system Invito a presentare proposte H2020-SMEInst-2016-2017 Vedi altri progetti per questo bando Bando secondario H2020-SMEINST-1-2016-2017 Meccanismo di finanziamento SME-1 - SME instrument phase 1 Coordinatore PLIOSAUR ENERGY LTD Contribution nette de l'UE € 50 000,00 Indirizzo 34 Sally Hill BS20 7BH PORTISHEAD SOMERSET Regno Unito Mostra sulla mappa PMI L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione. Sì Regione South West (England) Gloucestershire, Wiltshire and Bristol/Bath area Bath and North East Somerset, North Somerset and South Gloucestershire Tipo di attività Private for-profit entities (excluding Higher or Secondary Education Establishments) Collegamenti Contatta l’organizzazione Opens in new window Partecipazione a programmi di R&I dell'UE Opens in new window Rete di collaborazione HORIZON Opens in new window Costo totale € 71 429,00
