CORDIS
EU research results

CORDIS

English EN

Automatic Fiber Placement Metitalia Tooling

Objective

This proposal responds to the call of Clean Sky 2 JTI-CS2-2017-CFP06-AIR-02-42, Layup tools for net-shape AFP-manufacturing of geometrically complex helicopter sideshell sandwich-panels.
The objective of this proposal is to develop, design, manufacture and deliver to the Topic Manager facilities suitable tooling’s to perform AFP (Automatic Fiber Placement) lamination and transfer uncured complex sandwich part of the side structure of an innovative helicopter.
Different tool materials and configurations will be developed to meet requirements of the call.
In particular, possible effect of uncured material and sandwich core on AFP lamination will be investigate and transfer of uncured bond assy from lamination to cure tool will be developed. deformations like warpage and shrinkage will be investigated by subscale test .According to the call, if necessary on the basis of process selected by T.M. the cure tool auxiliary for lamination of inner skin of sandwich parts will be provided with a suitable handling device to move the skin on cure tool.
In addition all the necessary auxiliary tool including template will be provided to support lamination, handling and post cure operation.
Several the tool material and configurations options will be evaluated performing selection based on key requirements like:
• Low energy consumption in tool and part fabrication
• Use wherever possible of green or recycled materials (like Recovered Uncured Prepreg Scrapes)
• Possible reuse of tool material/component
The opportunities for innovation are:
• Unusual architecture of the aircraft (rotorcraft with a specific architecture)
• Optimized tooling for AFP lamination of complex shape.
• Development of innovative approach to laminate sandwich panel by AFP
• Transfer of uncured bond assy to cure tool without wrinkles and fiber distortion.
Proponents of the project have a wide knowledge of fabrication of composite materials and processes, and in addition, an awareness of the advantages and disadvantages that each choice may entail. The know-how of the proponents will be fully shared with TM, in order to reach the agreed goals
Leaflet | Map data © OpenStreetMap contributors, Credit: EC-GISCO, © EuroGeographics for the administrative boundaries

Coordinator

METITALIA S.R.L.

Address

Via Fontana 17
84012 Angri

Italy

Activity type

Private for-profit entities (excluding Higher or Secondary Education Establishments)

EU Contribution

€ 224 644,50

Participants (1)

Sort alphabetically

Sort by EU Contribution

Expand all

O.M.P.M. - OFFICINA MERIDIONALE DIPRECISIONE MECCANICA SRL

Italy

EU Contribution

€ 176 025,50

Project information

Grant agreement ID: 785457

Status

Ongoing project

  • Start date

    1 March 2018

  • End date

    29 February 2020

Funded under:

H2020-EU.3.4.5.4.

  • Overall budget:

    € 572 386,25

  • EU contribution

    € 400 670

Coordinated by:

METITALIA S.R.L.

Italy