Skip to main content
European Commission logo print header

Reduced platform lift enhancing accessibility for disable citizens

Descrizione del progetto

Montascale sostenibile per gli europei con disabilità

In Europa ci sono più di 3 milioni di persone su sedia a rotelle e 40 milioni di persone con disabilità motorie. Le barriere architettoniche nell’UE rappresentano per loro un grosso problema nella vita quotidiana. I sollevatori a piattaforma (in grado di trasportare una sedia a rotelle) e i montascale creati per risolvere questo problema consumano molta energia, sono costosi da mantenere, ingombranti, rumorosi e lenti. Nel 2015, Extrema ha iniziato a sviluppare Slim+, un montascale a piattaforma dalle dimensioni ridotte e a basso consumo energetico. Il prodotto è più veloce, flessibile, sostenibile, sicuro e silenzioso. Il progetto Slim plus, finanziato dall’UE, svolgerà le attività richieste per migliorare le prestazioni di un prototipo sviluppato e testato a livello di laboratorio per raggiungere il mercato.

Obiettivo

Architectonical barriers at the EU represent a problem to people in general with mobility impairments in their everyday lives. This is a big problem, as currently there are 3.2M wheelchair users and 40M people in Europe that cannot walk without aid. To solve out this matter, platform lifts (able to carry a wheel chair) and stairlifts where created. However, this kind of machines present some problems at the time of its use, from which the most important one is their high consumption of energy, which makes them machines expensive to maintain. This consumption increases in an exponential way when the number of steps is high (>3 floors), being evident in the electricity bill. Other limitations are their big dimensions (not suitable for stairs < 1m), the disturbing noise of their motors, and the low speed (7’ to complete 4 floors!).
In 2015, Extrema, a leader in accessibility systems, started developing Slim+, a platform stairlift with the smallest size and the lowest energy consumption of the market (50% less), which will allow to do more steps with the same motor, in narrow places and in a more sustainable and secure (improved electronic system) and silent (<60Db) way. The main innovative components developed include: new breaking system, new material for key components, novel stabilizing system and improved electronic device.
A first prototype has been developed and tested at lab level (TRL6), however there are several activities to be done to improve the performance of current prototype to reach the market.
Slim+ emerges in response to the demands in terms of energy consumption for platform lifts, with the purpose of widespread accessibility and mobility to all European citizens, especially in urban areas. With Slim+, Extrema will be able to compete in a wider market, enlarging the possibilities of market up-take. We estimate that with this project, Extrema will reach a margin of €5.4M by 2024, and will increase the number of employees by 15.

Invito a presentare proposte

H2020-EIC-SMEInst-2018-2020

Vedi altri progetti per questo bando

Bando secondario

H2020-SMEInst-2018-2020-1

Meccanismo di finanziamento

SME-1 - SME instrument phase 1

Coordinatore

EXTREMA SRL
Contribution nette de l'UE
€ 50 000,00
Indirizzo
VIA DELL'INDUSTRIA 2
46031 Bagnolo San Vito
Italia

Mostra sulla mappa

PMI

L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.

Regione
Nord-Ovest Lombardia Mantova
Tipo di attività
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Collegamenti
Costo totale
€ 71 429,00