Skip to main content
European Commission logo print header

Development and validation of a powder HIP route for high temperature Astroloy to manufacture Ultrafan® IP Turbine Casings

Projektbeschreibung

Leistungsprüfung einer vielversprechenden Superlegierung für den Einsatz in UltraFan-Triebwerken

Die Nachfrage nach einem höheren Wirkungsgrad von Gasturbinentriebwerken hat die Entwicklung von leistungsfähigeren Werkstoffen vorangetrieben, die sehr hohen Temperaturen standhalten können. Superlegierungen sind für den Einsatz in Hochtemperaturbereichen sehr gefragt, da sie eine hohe Festigkeit, Stabilität sowie Korrosions- und Oxidationsbeständigkeit aufweisen. Das EU-finanzierte Projekt HUC befasst sich mit der Herstellung von Mitteldruckturbinengehäusen für die neue Generation des UltraFan-Triebwerks. Das Herstellungsverfahren besteht aus dem Hochdruck- und Hochtemperaturpressen einer pulverförmigen Superlegierung namens Αstroloy, wodurch der Energieverbrauch im Vergleich zum herkömmlichen Schmiedeverfahren erheblich gesenkt werden kann. Durch die Verwendung von Αstroloy will HUC vor allem das Buy-to-Fly-Verhältnis von 9 (bei herkömmlichen Herstellungsverfahren) auf weniger als 3 verbessern.

Ziel

This is a response to the Call for Proposal under Clean Sky 2 and JU to manufacture IP Turbine casings for the new generation Ultrafan® engine from Astroloy using Net Shape Hot Isostatic Pressing of powder (NSHIP).
Astroloy with high γ’ volume fraction have the required high temperature properties but it is unforgeable. Thus, Powder-HIP is the most promising process route for this alloy though this technique presents several challenges such as presence of PPBs in the HIPped microstructure, the high cost of powder and HIP-tooling. HUC, making usage of the background technology will face and overcome these challenges and will take a step further tackling technology gaps alongside the material capability, basic mechanical behaviour and impact in the presence of the exposure with the ultimate goal for this technology to be fully tested in the relevant UltraFan® Demonstrator engine environment.
The main objective of HUC is to improve the buy to fly ratio from the typically achieved 9 through the conventional cast and wrought route to less than 3 through NNSHIP being the material developed able to withstand engine relevant conditions with and without exposure guaranteeing its ability to contain. The work plan includes the following main activities:
1. Development and Optimisation of a powder HIP processing for Astroloy
2. Characterisation of mechanical properties to generate a database which supports the component design
3. Development of experiments and numerical simulations to assess the material´s behaviour under dynamic and ballistic conditions
4. Characterisation and understanding of mechanical properties with exposure at high temperatures
5. Development of low cost tooling for HIPping high temperature superalloy casings
6. Development and validation of process modelling capabilities
7. Manufacturing of canning/tooling to guarantee the compliance of the finish product with the requirements
8. Project progress Management, Dissemination, Communication and Exploitation

Koordinator

ASOCIACION CENTRO TECNOLOGICO CEIT
Netto-EU-Beitrag
€ 667 836,25
Adresse
PASEO MANUEL DE LARDIZABAL 15
20018 San Sebastian
Spanien

Auf der Karte ansehen

Region
Noreste País Vasco Gipuzkoa
Aktivitätstyp
Research Organisations
Links
Gesamtkosten
€ 667 836,25

Beteiligte (4)