CORDIS
EU research results

CORDIS

English EN

Automating what is not automatable Automated defect diagnosis and Machining system for manufactured parts.

Project information

Grant agreement ID: 886899

Status

Ongoing project

  • Start date

    1 December 2019

  • End date

    31 March 2020

Funded under:

H2020-EU.3.

H2020-EU.2.3.

H2020-EU.2.1.

  • Overall budget:

    € 71 429

  • EU contribution

    € 50 000

Coordinated by:

AUTOMATIZACION DE SISTEMAS Y APLICACIONES INDUSTRIALES SL

Spain

Project description

English EN

Automating metal machining inspections

Automation on the shop floor is vital, particularly in turning, milling and grinding, to reduce cycle times and improve quality. This, however, is not the case with inspection processes that involve human operators using software and equipment to check parts and dimensions. It is time-consuming, involving the measurement of the manufactured part, comparison with required geometry and machining of the part. The EU-funded SCR4.0 project aims to speed up this process. It will automate the final quality control and machining process. According to the project, automating the entire process in one smart integrated manufacturing cell will lead to increased productivity (up to 33 %) and lower costs (up to 50 %) in the first 3 years.

Coordinator

AUTOMATIZACION DE SISTEMAS Y APLICACIONES INDUSTRIALES SL

Address

Pol Ind Camino Real 9 Carretera Logrono Km 18
50298 Pinseque

Spain

Activity type

Private for-profit entities (excluding Higher or Secondary Education Establishments)

EU Contribution

€ 50 000

Project information

Grant agreement ID: 886899

Status

Ongoing project

  • Start date

    1 December 2019

  • End date

    31 March 2020

Funded under:

H2020-EU.3.

H2020-EU.2.3.

H2020-EU.2.1.

  • Overall budget:

    € 71 429

  • EU contribution

    € 50 000

Coordinated by:

AUTOMATIZACION DE SISTEMAS Y APLICACIONES INDUSTRIALES SL

Spain