Objetivo A new epoxy resin (EPOSIR 725) suitable to manufacture structural aerospace componemts by resin transfer moulding (RTM) technology has been developed. The more significant features are: suitable physical and mechanical properties, in particular glass transition about 140 C, low shrinkage (0.28%); very low health risk (no toxic components in precursors or curing agents); suitable processability (low viscosity (300-400 cps at low temperature)) and useful curing cycles.Based on this resin, the RTM process has been successfully implemented for the production of integral stiffened panels (having complex geometry) with good dimensional tolerance and good surface finish.2 other interesting epoxy systems for RTM technology (EPOSIR 687 and 688) having reduced production cost have also been investigated. They will be useful in applications where low brittleness is not mandatory and which require short or medium curing cycles and (in the case of 687) a ratio of resin to hardener of about 1 to 1.-Development of new polymeric epoxy-phenolic matrices for RTM -Development of suitable preforming and structural fabric reinforcements -Development of an advanced cost effective manufacturing process of advanced composites for aerospace application with high structural properties through an advanced RTM process technology -Substantial reduction of manufacturing costs of advanced composites and solution of availability problems of raw and intermediate materials to the European industry. Ámbito científico engineering and technologymechanical engineeringmanufacturing engineeringengineering and technologymaterials engineeringcompositesnatural sciencesmathematicspure mathematicsgeometry Programa(s) FP2-BRITE/EURAM 1 - Specific research and technological development programme (EEC) in the fields of industrial manufacturing technologies and advanced materials applications (BRITE/EURAM), 1989-1992 Tema(s) Data not available Convocatoria de propuestas Data not available Régimen de financiación Data not available Coordinador Sir SpA Aportación de la UE Sin datos Dirección Via Don Grazioli 33 20122 Milano Italia Ver en el mapa Coste total Sin datos Participantes (3) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo Dornier Luftfahrt GmbH Alemania Aportación de la UE Sin datos Dirección An der Bundesstraße 31 88039 Friedrichshafen Ver en el mapa Coste total Sin datos Italcompositi SpA Italia Aportación de la UE Sin datos Dirección Ponte del Tremio 03012 Anagni Frosinone Ver en el mapa Coste total Sin datos Production Engineering Research Association (PERA) Reino Unido Aportación de la UE Sin datos Dirección Nottingham Road LE13 0PD Melton Mowbray Ver en el mapa Coste total Sin datos