Objetivo The low nitrogen content required for highly ductile steel grades (strips, bars, wire) is not usually achieved in conventional, 100% scrap-based EAF steel-making. The aim of the research is to establish the feasibility and the features of an industrial process for producing low nitrogen (50 ppm and less) steels in the EAF, using scrap as iron source, in adapting technologies, which are already available (coal/oxygen injections, arc setting, bath stirring, etc.). This new ability of the EAF will enlarge the production range of the short, steel recycling route towards higher grade steels without the need to import special iron sources (pre-reduced ore) which are not yet produced economically in Europe. Programa(s) ECSC-STEELRES 8C - Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995 Tema(s) C1 - Primary steelmaking Convocatoria de propuestas Data not available Régimen de financiación CSC - Cost-sharing contracts Coordinador INSTITUT DE RECHERCHES DE LA SIDERURGIE FRANÇAISE Aportación de la UE Sin datos Dirección Voie Romaine - BP 320 57214 MAIZIERES-LES-METZ CEDEX Francia Ver en el mapa Coste total Sin datos Participantes (2) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo ACENOR I+D España Aportación de la UE Sin datos Dirección Barrio Ugarte s/n 48970 BASAURI (VIZCAYA) Ver en el mapa Coste total Sin datos Rheinisch-Westfälische Technische Hochschule Aachen (RWTH) Alemania Aportación de la UE Sin datos Dirección Kopernikusstraße 16 52056 Aachen Ver en el mapa Coste total Sin datos