Objective A simulation model of the vacuum circulation process (VCP) for decarburization of steel has been developed. This model covers the steel circulation, the decarburization reaction, vessel pressure with its effect on the equilibrium conditions, and oxygen pickup from the ladle slag. Comparisons of simulation results with measured values of a VCP plant demonstrate that the model describes the process with excellent accuracy. Within the new project the simulation model shall be extended to include further metallurgical operations (such as stirring, gas input, oxygen blowing, dehydrogenation and nitrogen control), and it shall be applied in order to improve design, operation, process observation and process control of VCP plants. Programme(s) ECSC-STEELRES 8C - Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995 Topic(s) C2 - Secondary steelmaking Call for proposal Data not available Funding Scheme CSC - Cost-sharing contracts Coordinator Betriebsforschungsinstitut des Verein Deutscher Eisenhüttenleute eV EU contribution No data Address Sohnstraße 65 40237 Düsseldorf Germany See on map Total cost No data Participants (2) Sort alphabetically Sort by EU Contribution Expand all Collapse all CENTRO SVILUPPO MATERIALI SPA Italy EU contribution No data Address Via di castel romano 100/102 00128 Roma eur See on map Total cost No data VOEST-ALPINE STAHL LINZ Austria EU contribution No data Address Turmstrasse 41 4031 Linz See on map Total cost No data