Objectif This research project is intended to thoroughly investigate various physical vapour deposition (PVD) techniques, namely Electron Beam Evaporation, Induction Heating Evaporation, Cathodic Arc Ion Plating, and Ion Beam Assisted Deposition, to assess the transferability of the respective process parameters to continuous modes of operation for the coating of steel strip. It is also proposed to define corresponding practical working conditions leading to an optimised combination of metallurgical features and users' properties. High performance anti-corrosion and anti-oxidation protective coatings are obtained by the various PVD techniques on steel substrates. The coatings under investigation are Al and Zn + X systems, where X = Al, Mg, Cr, Ti, Mn. Programme(s) ECSC-STEELRES 8C - Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995 Thème(s) F7 - Surface characteristics Appel à propositions Data not available Régime de financement CSC - Cost-sharing contracts Coordinateur CENTRO SVILUPPO MATERIALI SPA Contribution de l’UE Aucune donnée Adresse Via di Castel Romano 100/102 00128 ROMA EUR Italie Voir sur la carte Coût total Aucune donnée Participants (4) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire CENTRE DE RECHERCHES METALLURGIQUES Belgique Contribution de l’UE Aucune donnée Adresse Rue Ernest Solvay, 11 4000 LIEGE Voir sur la carte Coût total Aucune donnée INASMET Espagne Contribution de l’UE Aucune donnée Adresse Mikeletegui Pasealekua 2 Parque Tecnológico 20009 SAN SEBASTIAN Voir sur la carte Coût total Aucune donnée KONINKLIJKE HOOGOVENS Pays-Bas Contribution de l’UE Aucune donnée Adresse 1970 CA IJMUIDEN Voir sur la carte Coût total Aucune donnée TEKNIKER Espagne Contribution de l’UE Aucune donnée Adresse Avda. Otaola, 20 20600 EIBAR (GUIPUZCOA) Voir sur la carte Coût total Aucune donnée