Skip to main content
European Commission logo print header

Redesign of electromechanic products for reuse and recyclability with special attention to the coopper problem

Objectif



The following research tasks will be carried out during the project:
1) Detailed analysis of the present technical situation. Identification of the most relevant Cu-containing
product.
2) LCA for selected product. Reference basis for later investigations. 3) Develop a first design-methodology, including disassembly, reuse and life extension.
4) Develop multisensory systems for functionality check to support automated disassembly.
5) Design of functional unit using new methodology and functionality check. LCA elaborations.
6) Evaluation of technical feasibility. Choice of fabrication procedure with respect to economic
considerations.
7) Mechanical and software adaptation of robot-aided disassembly line. Test of procedures on a laboratory
scale.
8) Test of improved sensor systems and integration with disassembly line.
9) Final LCA of developed product line.
10) Improved design methodology, elaboration of guidelines and design tools based on experiences gained
during sensor-controlled disassembly demonstration.

Appel à propositions

Data not available

Régime de financement

CSC - Cost-sharing contracts

Coordinateur

Österreichisches Forschungszentrum Seibersdorf GmbH
Contribution de l’UE
Aucune donnée
Adresse

2444 Seibersdorf
Autriche

Voir sur la carte

Coût total
Aucune donnée

Participants (6)