Cel - The main objective is to develop a self-contained, very low volume, remotely powered signal conditioning subsystem to improve, for current DECT picocell system, the link quality in both directions of the communication in the wire interface between BS and BSC. The ultimate goal is to integrate this conditioning mechanism in a connector-like module for BS to BSC links allowing wire links up to 3 km.- To demonstrate in field trials the performance and feasibility of the device.Secondary goals whose achievement is crucial for accomplishment of the main goals are:- To develop an ASIC capable of performing, in one single location, channel conditioning for bidirectional end-to-end links.- To develop a high density DC/DC conversion module, incorporating advanced packaging of magnetic devices, to be included in the connector-like solution to allow remote powering for both functions in the conditioning device and BS from BSC.- To demonstrate the signal conditioning architecture by means of a suitable feasibility model for the radio link, to achieve BER=10{-3} at 200 ns of delay spread.The continuous growth of the subscriber base in current mobile systems, i.e. Digital European Cordless Telecommunication, (DECT), system provides a motive to seek new ways of increasing the capacity on offer. One approach is to improve signal quality by using advanced signal processing techniques. The added value of this approach with respect to already existing solutions, namely HDSL and ADSL, is that the signal processing will only be done at one line termination of the digital local line. This contrasts with HDSL that requires signal processing at both line terminations of the digital local line. The outcome of these activities will be a connector-like module attachable between Base Station (BS) and the wire towards the Base Station Controller (BSC). Improvement of the air interface of DECT with the same single-ended concept to make it robust against multipath propagation will also be addressed. Dziedzina nauki engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsignal processing Program(-y) FP4-ESPRIT 4 - Specific research and technological development programme in the field of information technologies, 1994-1998 Temat(-y) 2.1 - Semiconductors - Microelectronics for product innovation Zaproszenie do składania wniosków Data not available System finansowania CSC - Cost-sharing contracts Koordynator Alcatel Espana Wkład UE Brak danych Adres Ramirez De Prado 5 28045 Madrid Hiszpania Zobacz na mapie Koszt całkowity Brak danych Uczestnicy (5) Sortuj alfabetycznie Sortuj według wkładu UE Rozwiń wszystko Zwiń wszystko Alcatel Microelectronics N.V. Belgia Wkład UE Brak danych Adres Westerring 15 9700 Oudenaarde Zobacz na mapie Koszt całkowity Brak danych Centro de Tecnologia de Las Comunicaciones Sa Hiszpania Wkład UE Brak danych Adres Parque Tecnologico De Andalucia 29590 Campanillas Zobacz na mapie Koszt całkowity Brak danych Interuniversity Microelectronics Centre Belgia Wkład UE Brak danych Adres Kapeldreef 75 3001 Leuven Zobacz na mapie Koszt całkowity Brak danych National Microelectronics Research Centre, University College Cork Irlandia Wkład UE Brak danych Adres Lee Maltings, Prospect Row Cork Zobacz na mapie Koszt całkowity Brak danych UNIVERSIDAD POLITECNICA DE MADRID Hiszpania Wkład UE Brak danych Adres Ciudad Universitaria MADRID Zobacz na mapie Koszt całkowity Brak danych
