Cel - The experiences in designing complex motion control products and high speed industrial communication have shown new requirements in the approach to electronic design. The complex planning of work and resources improves the quality assurance system of port.- The new approach to electronic design is a first step to a linked hard- and software databank for control functions. The start of a new motion controller family will be enabled by using a new development tool set with support of mixed hardware/software design.- Commercial impacts are expected in various directions; shorter development cycle times, higher quality outputs in electronic system design, predictable results, and re-usability of components for other projects.- The goal of the project is very important also for other high technology oriented companies especially in the motion control market, e.g. for easy and fast solution of motion control problems with difficult dynamic properties, short time-to-market by rapid prototyping, and volume dependent cost optimisation of the final product.Special adapted drives require rapid prototyping, short time-to-market, high design security, and high qualified technical support. The intelligent electronic drive control products of port are designed with DSP for control algorithmic and machine safety. In addition, FPGAs are used to connect power stages and measurement systems and for realising fast communication and logic control. To design new improved products, one task is to evaluate a commercially available development tool set and to use it to improve the design efficiency within a design experiment integrating new state of the art FPGAs with new functions into the motion products of port. Dziedzina nauki natural sciencescomputer and information sciencessoftware Program(-y) FP4-ESPRIT 4 - Specific research and technological development programme in the field of information technologies, 1994-1998 Temat(-y) 2.7 - Semiconductors - Building blocks, methods & tools Zaproszenie do składania wniosków Data not available System finansowania ERG - Marie Curie actions-European Re-integration Grants Koordynator Port Gesellschaft fur Computergestutzte Automation Wkład UE Brak danych Adres Antonienstrasse 3 06749 Bitterfeld Niemcy Zobacz na mapie Koszt całkowity Brak danych
