Objetivo Nowadays the production shemes of natural stone manufacturing companies, and particularly those manufacturing granite products, are quite constrained by the limitations of current sawing machinery that seem to have reached an efficiency limit. This situation has no perspectives of improvement unless the whole model is restructured. The present project intends to design an innovative system for sawing granite blocks, based in a new concept that radically changes the current procedures of traditional machinery. This new concept integrates innovative ideas both for the mechanical design (including an original arrangement of the sawing elements: a bi-wire machine, a penta-wire machine and a final multi-wire machine and block handing devices: rail supported), the sawing tool itself and the waste management not using pollutant components, in a quite simple system. The expected efficiency rounds seven times that of the traditional methods. Ámbito científico engineering and technologyenvironmental engineeringwaste management Programa(s) FP5-GROWTH - Programme for research technological development and demonstration on "Competitive and sustainable growth 1998-2002" Tema(s) 1.1.3.-1. - Key Action Innovative Products, Processes and Organisation Convocatoria de propuestas Data not available Régimen de financiación EAW - Exploratory awards Coordinador GRANITOS DE ATIOS S.A. Aportación de la UE Sin datos Dirección Poligono Industrial a Granxa 36400 PORRINO España Ver en el mapa Coste total Sin datos Participantes (1) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo BIDELEIMPIANTI DI BIDESE ILARIO & C SNC Italia Aportación de la UE Sin datos Dirección Via S. Iberto 38 36042 BREGANZE Ver en el mapa Coste total Sin datos