Objetivo Increasing functional requirements and miniaturization of products together with advanced materials properties of modern plastics are posing new challenges to plastics processing. Tools wear and corrosion are increasing and in addition, advanced plastics often are highly adhesive to the moulds. These problems are severe with micro-structured moulds and are limiting factors for accuracy ands miniaturisation. The complex problem is to be solved through an integrated approach compining materials and manufacturing technologies for advanced tool development. The aim is to increase accuracy of forming, reduce tooling costs, increase tool life cycles and reduce the use of release agents. Product quality, cost efficiency and low emission processing of plastics products will be improved. Substantial advances in manufacturing of miniaturised are expected. The objectives will be achieved by optimised tool design including micro-forming in combination with improved functional plasma-spray/PVD/galvanic coatings and multi-layers. The technology will be developed in a partnership of RTD performers, equipment suppliers and industrial users. Ámbito científico engineering and technologymaterials engineeringcoating and films Programa(s) FP5-GROWTH - Programme for research technological development and demonstration on "Competitive and sustainable growth 1998-2002" Tema(s) 1.1.3.-1. - Key Action Innovative Products, Processes and Organisation Convocatoria de propuestas Data not available Régimen de financiación EAW - Exploratory awards Coordinador ERODIER- UND GALVANOTECH GMBH Aportación de la UE Sin datos Dirección Industrieweg 5 09648 Mittweida Alemania Ver en el mapa Coste total Sin datos Participantes (1) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo TCE TECHNICAL COATING ENGINEERING GMBH Austria Aportación de la UE Sin datos Dirección Werk-VI-Strasse 56 Werk Deuchendorf 8605 KAPFENBERG Ver en el mapa Coste total Sin datos
