Skip to main content
European Commission logo print header

Validation of constraint-based assessment methodology in structural integrity

Objective

At present, there is a disparity between the characteristics measured on nuclear reactor components and test specimens. In particular, in the pattern of crack-tip stresses and strains causing plastic flow and fracture (the so-called constraint effect). Crack-tip constraint in components is generally lower than in test specimens and effective toughness is correspondingly higher. The toughness measured on standard test specimens is therefore likely to underestimate that exhibited by cracks in components. The purpose of this project is to develop and validate, by an iterative process of experiment and analysis, innovative procedures for assessing possible states of crack-tip constraint in ageing nuclear pressure boundary components.

This will provide nuclear plant operators and regulators with:
(i) improved predictions of safety margins under normal and abnormal conditions, using a validated defect assessment methodology;
(ii) improved lifetime extension arguments.

Call for proposal

Data not available

Coordinator

SERCO LTD
EU contribution
No data
Address
The Quadrant 404, Birchwood Park
WA3 6AT WARRINGTON
United Kingdom

See on map

Total cost
No data

Participants (12)