Skip to main content
European Commission logo print header
Contenu archivé le 2022-11-21

Control of the temperature of the bar on entry to the finisher

Objectif

The aim of this project is to design, build and test, in the normal operating conditions of the hot strip mill, a new short cooling equipment placed between the roughing and the finishing mill, in order to cool, in a very fast and controllable way, the bar coming out of the roughing mill. As far as the products are concerned, the effect of the bar cooling strategy will be assessed for different steel grades. Laboratory trials will be conducted in parallel to the industrial trials. With regard to the process, the following aspects will be analysed, among others: cooling rate, homogeneity, possibility of reduction of though thickness heterogeneity, efficiency of the descaler after bar cooling.
Contracts numbers:
7215-PA/030 7215-PB/030

Appel à propositions

Data not available

Régime de financement

CSC - Cost-sharing contracts

Coordinateur

CENTRE DE RECHERCHES METALLURGIQUES
Contribution de l’UE
Aucune donnée
Adresse
Rue Ernest Solvay, 11
4000 LIEGE
Belgique

Voir sur la carte

Coût total
Aucune donnée

Participants (1)