Skip to main content
DeutschDE
European Commission logo print header

Decision making tool based on an interface between cad and finite element solver for production lifecycle design

Ziel

CAD systems do not have facilities to do iterative calculations on the strength of the design, the distortion of the design or other physical changes and effects which occur during product-service lifecycle. Separate computer programmes such as Finite Element solver carry out the calculations necessary for the checking of the product during lifecycle. They can only be handle one shape of product at a time. To make changes, the engineer must make the decision and manually change the problem without recommendation. This means that not much iteration, usually one time in SME, are made and a less than optimal design is made. The aim of this project is to take the calculation stage from CAD and develop an interface with FE to automate calculations necessary for the checking of the product in dynamic use (Lifecycle). The system will undertake many repeat calculations automatically changing the design against given rules until an optimum is obtained.

Programm/Programme

Thema/Themen

Aufforderung zur Vorschlagseinreichung

Data not available

Finanzierungsplan

EAW - Exploratory awards

Koordinator

ROSS COURTNEY LIMITED
EU-Beitrag
Keine Daten
Adresse
Building 56, the Pensnett Estate
DY6 7PP DUDLEY
Vereinigtes Königreich

Auf der Karte ansehen
Gesamtkosten
Keine Daten

Beteiligte (1)

Diese Seite teilen

Herunterladen

Letzte Aktualisierung: 12 April 2005

Mein Booklet

Permalink: https://cordis.europa.eu/project/id/G1ST-CT-2000-00110/de

European Union, 2024